|
01-13-2016, 05:02 PM
|
#1 |
|
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,228
|
292 carb.
I have a carburetor from an 81 292 engine. It has the electric choke so it can be used on any manifold without divorced coil & linkage. The vacuum pulloff works & the heater coil works. as does the idle selinoid. It should have a kit put in before use as it has been setting for a long time. This carb has a larger bore & venturi then the 250. It has no rust or corrosion. $50 plus $15 shipping.
George SOLD Last edited by Wrenchbender Ret; 01-23-2016 at 05:45 PM. Reason: Sold |
|
|
|
01-19-2016, 10:17 AM
|
#2 |
|
Registered User
Join Date: Aug 2015
Location: Lake Placid, FL.
Posts: 67
|
Re: 292 carb.
I sent you a PM.....Dave
|
|
|
|
|
01-19-2016, 04:50 PM
|
#3 |
|
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,228
|
Re: 292 carb.
I replied.
George |
|
|
|
|
01-19-2016, 09:45 PM
|
#4 |
|
Registered User
 
Join Date: Aug 2015
Location: Pine Mountain, Georgia
Posts: 125
|
Re: 292 carb.
Can I replace my stock carb on my 250 with this???
__________________
71 C10 I6 250 TH350 power steering and power breaks... |
|
|
|
|
01-19-2016, 11:26 PM
|
#5 |
|
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,228
|
Re: 292 carb.
It will fit good but I'm not sure how it will run. It has larger throat & venturies then the 250. Dave has first pick at it.
George |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
