parting out 67 2wd longbed 3/4t BIG window - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67sss** · 08-29-2005, 09:14 PM

u-bolts and pads- $15 pair(set)....SOLD

speaker bracket/wire(speaker shot)-$10....SOLD

seat- tilts forward, has hardware on rails, if you live on the west coast, parts of Idaho or Neveda I can ship this thru my employer from dock to dock, for a good price. $75

spark plug heat shields OR overflow tank holders-$5 ea.

let me know if you see what you need on the pic with the rods,switches, ect....this was extra stuff just hangin around.

more to come off the truck,need something????

**clay68c10** · 08-29-2005, 11:14 PM

Have any of the front end trim? I could use a right/pass side eyebrow trim piece. Also interested in the coolant recovery bracket.

samwise68 · 08-29-2005, 11:41 PM

body panels?

olblue60@aol.com · 08-30-2005, 07:32 AM

Are the blue door panels avail? whats the condition? Any blue seatbelts?Thanks!
John

Jakes-66-K10 · 08-30-2005, 09:32 AM

I'm interested in the throttle road that connects to the carb. Price to 84003?

**67sss** · 08-30-2005, 04:50 PM

clay68-trim all gone, which recovry bracket you want?

samwise68-which ones in paticular?

olblue60-drivers panel torn, pass ok-willget pic and post here for you, belts are blue-think they aren't 67's(center belt too) will add pic

vortexofpain-which rod?

**clay68c10** · 08-30-2005, 04:57 PM

The one at the bottom of the picture. What type of payment works for you...

**67sss** · 08-30-2005, 05:31 PM

here you go olblue

**67sss** · 08-30-2005, 05:32 PM

and more

samwise68 · 08-30-2005, 09:57 PM

umm..the fenders/grill. pics, if its not too much of a trouble.

**67sss** · 08-30-2005, 10:40 PM

fenders shot, core support shot, grille..... : ) here you go. $80 ptr

**clay68c10** · 08-30-2005, 10:55 PM

Payment sent. Thanks

olblue60@aol.com · 08-31-2005, 06:12 AM

The blue in the picture of the doorpanel looks a little lighter then the one on my 68. Lemme check and i'll get back. Thanks for the pics.

John

olblue60@aol.com · 09-01-2005, 06:56 AM

My door panels look to be a bit darker. I'm gonna pass. Thanks!

John

jostrans68 · 09-01-2005, 08:40 AM

how much for the seat belts and bolts. I AM in tacoma so no shipping although it may be cheaper than gas

**67sss** · 09-01-2005, 06:51 PM

$25 for all 3 sets, I can send to our terminal in auburn if you wanna get em from there.

jostrans68 · 09-02-2005, 08:51 AM

how do you want payment?

CE20934 · 09-03-2005, 10:26 AM

Are those two smaller switches in the picture wiper switches?

**67sss** · 09-03-2005, 12:24 PM

jostrans68- sent m/o order, will pm addy

ce20934-yes both are wiper switches- $7.50 each shipped to you.

1sick7 · 09-03-2005, 12:41 PM

do you have a driveshaft for sale

Jakes-66-K10 · 09-03-2005, 02:37 PM

Quote:

Originally Posted by 67sss

vortexofpain-which rod?

In your picture above there is a metal rod, threaded on one end and an L bend on the other. It's used to go from the carb linkage to the metal pushrod linkage attached to the firewall, and further down the gas pedal.

Also interested in the windshield washer bracket, shipped to 84003.

**67sss** · 09-03-2005, 03:58 PM

1sick7- there's a driveline on this truck 2 pc. what length do you need? measure from center of cup to cup. where do live?

vortexofpain- $15 to you, rod and w/w bracket(in pic 4, right?)

Big Block · 09-03-2005, 04:30 PM

I would be interested in the u bolts and the overload spring pads. Need total shipped to 27517 and I will send money order and adress. Thanks B.B.

**67sss** · 09-04-2005, 02:03 PM

Big Block-total to you $31.25.thanks

Big Block · 09-04-2005, 05:07 PM

pm sent Thanks B.B.

08-29-2005, 09:14 PM	#1
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	parting out 67 2wd longbed 3/4t BIG window u-bolts and pads- $15 pair(set)....SOLD speaker bracket/wire(speaker shot)-$10....SOLD seat- tilts forward, has hardware on rails, if you live on the west coast, parts of Idaho or Neveda I can ship this thru my employer from dock to dock, for a good price. $75 spark plug heat shields OR overflow tank holders-$5 ea. let me know if you see what you need on the pic with the rods,switches, ect....this was extra stuff just hangin around. more to come off the truck,need something???? Attached Images Last edited by 67sss; 09-18-2005 at 11:53 AM. Reason: sold items

08-29-2005, 11:14 PM	#2
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,990	Have any of the front end trim? I could use a right/pass side eyebrow trim piece. Also interested in the coolant recovery bracket. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-30-2005, 07:32 AM	#4
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	67 longbed parts Are the blue door panels avail? whats the condition? Any blue seatbelts?Thanks! John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

08-30-2005, 04:50 PM	#6
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	67 parts clay68-trim all gone, which recovry bracket you want? samwise68-which ones in paticular? olblue60-drivers panel torn, pass ok-willget pic and post here for you, belts are blue-think they aren't 67's(center belt too) will add pic vortexofpain-which rod?

08-30-2005, 04:57 PM	#7
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,990	The one at the bottom of the picture. What type of payment works for you... __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-29-2005, 11:41 PM	#3
samwise68 FarmBoy. Join Date: Feb 2005 Location: Rhinelander, WI Posts: 1,103	body panels?

08-30-2005, 09:32 AM	#5
Jakes-66-K10 Registered User Join Date: Aug 2004 Location: Idaho Posts: 640	I'm interested in the throttle road that connects to the carb. Price to 84003?

08-30-2005, 05:31 PM	#8
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	belts/panel pics here you go olblue Attached Images

08-30-2005, 05:32 PM	#9
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	more and more Attached Images

08-30-2005, 09:57 PM	#10
samwise68 FarmBoy. Join Date: Feb 2005 Location: Rhinelander, WI Posts: 1,103	umm..the fenders/grill. pics, if its not too much of a trouble.

08-30-2005, 10:40 PM	#11
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	fenders/grille fenders shot, core support shot, grille..... : ) here you go. $80 ptr Attached Images

08-30-2005, 10:55 PM	#12
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,990	Payment sent. Thanks __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-31-2005, 06:12 AM	#13
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	The blue in the picture of the doorpanel looks a little lighter then the one on my 68. Lemme check and i'll get back. Thanks for the pics. John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

09-01-2005, 06:56 AM	#14
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	My door panels look to be a bit darker. I'm gonna pass. Thanks! John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

09-01-2005, 08:40 AM	#15
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	how much for the seat belts and bolts. I AM in tacoma so no shipping although it may be cheaper than gas __________________ [CGTW Member former 67-72 now with a 96 silverado



Register or Log In To remove these advertisements.

09-01-2005, 06:51 PM	#16
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	$25 for all 3 sets, I can send to our terminal in auburn if you wanna get em from there.

09-02-2005, 08:51 AM	#17
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	how do you want payment? __________________ [CGTW Member former 67-72 now with a 96 silverado

09-03-2005, 10:26 AM	#18
CE20934 Senior Member Join Date: Apr 2002 Location: Help! I'm in an office park with its own network of freeways! Posts: 470	Are those two smaller switches in the picture wiper switches? __________________ '67 C20--427 tall deck/SM420, 4.10 HO52 (Michigan has not been kind to the Old Man) '95 Caprice--355 LT1/T56/3.42 8.5" 10-bolt (daily driver, almost 300k on the chassis) '07 Outback--wife's car. 125k & counting. No head gasket or transmission issues yet. fingers crossed

09-03-2005, 12:24 PM	#19
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	parts jostrans68- sent m/o order, will pm addy ce20934-yes both are wiper switches- $7.50 each shipped to you.

09-03-2005, 12:41 PM	#20
1sick7 Registered User Join Date: Dec 2004 Location: elkton Posts: 12	do you have a driveshaft for sale

09-03-2005, 03:58 PM	#22
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	stuff 1sick7- there's a driveline on this truck 2 pc. what length do you need? measure from center of cup to cup. where do live? vortexofpain- $15 to you, rod and w/w bracket(in pic 4, right?)

09-03-2005, 04:30 PM	#23
Big Block Big Block Join Date: Mar 2005 Location: Durham, N.C. Posts: 1,649	I would be interested in the u bolts and the overload spring pads. Need total shipped to 27517 and I will send money order and adress. Thanks B.B.

09-04-2005, 02:03 PM	#24
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	ubolts Big Block-total to you $31.25.thanks

09-04-2005, 05:07 PM	#25
Big Block Big Block Join Date: Mar 2005 Location: Durham, N.C. Posts: 1,649	pm sent Thanks B.B.

Register or Log In To remove these advertisements.