Finished Engine Pics Please - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70rs/ss · 12-16-2005, 12:05 PM

Quote:

Originally Posted by shifty

I see that big foam filter and I wonder - is that a fire hazard? I've heard stories about people's trucks burning to the ground because they used a foam filter. Never actually seen it though, so I figured I'd ask...

Than not a foam filter, its a pre-filter. There is a regular filter behind that. The pre-filter keeps the chunks and bugs from getting into the filter and plugging it up too fast. The one I heard about (and actually saw go down in a blaze of glory) is the Edelbrock foam filter that is triangular.

FirstGen · 12-16-2005, 01:58 PM

just thought I would throw some of mine in here too...

Mudder · 12-16-2005, 02:36 PM

Mine will all be redone in about a month or so. It's all apart now waiting. It'll be a lot different I believe.

cdyblu · 12-16-2005, 02:58 PM

Here's a pic of my 572 cid big block

68Stepbed · 12-16-2005, 03:09 PM

Mine with the different valve covers.

Steelawork'n · 12-17-2005, 02:20 PM

68,

Are those original valve covers of a 283??

demi · 12-17-2005, 03:41 PM

How about another stock pic. Here's one of mine from a recent cruise night.

68Stepbed · 12-17-2005, 05:00 PM

Nopey, they're Billet Specialties with the old logo milled in them.

super72bb · 12-17-2005, 05:24 PM

Pretty much a stock look here. I hope this is useful. 1972 Shortfleet 402/Th400. Still in the making.

Curt

FRENCHBLUE72 · 12-17-2005, 07:45 PM

Heres mine not real pretty but it is a daily driver..

67Fleet · 12-26-2005, 06:38 PM

Finally got off my butt to snap a pic, but the motor's not done yet....

71Dragtruck · 12-26-2005, 09:24 PM

Here is a pic of my old motor, going to dyno and pick up my new one on the 28th. It will have alot more power and a more serious look.

Steelawork'n · 12-31-2005, 09:33 PM

Ok, now I'm finally going to load my beater pics:

Name: engine1.gif
Views: 424
Size: 19.0 KB

Name: engine2.jpg
Views: 395
Size: 18.5 KB

Name: engine3.jpg
Views: 442
Size: 18.4 KB

Still kind of rough.

*bskylerj* · 01-01-2006, 01:14 AM

Here is some pictures of my 71 super. It is almost done. I am waiting for my aluminum radiator and electric fans to show up. This is a 454 with a supercharger running 8lbs. of boost. I have also installed the new ABS brake unit that I saw on rucks when they were doing copperhead.

longhorn70gmc · 01-01-2006, 11:30 PM

Good reference pics in this post. I like it. I am amazed at how different engine bays look.
Thanks for the pics!

lngbed71 · 01-02-2006, 12:12 PM

Here's mine

*bskylerj* · 01-03-2006, 02:30 AM

That looks great lngbed71.

Steelawork'n · 01-14-2006, 09:08 PM

Quote:

Originally Posted by longhorn70gmc

Good reference pics in this post. I like it. I am amazed at how different engine bays look.
Thanks for the pics!

I agree. These pics represent many hours of fun, sweat and $$. Thanks, but keep them coming please.

*FormerMember* · 01-14-2006, 10:41 PM

Quote:

Originally Posted by bskylerj

Here is some pictures of my 71 super. It is almost done. I am waiting for my aluminum radiator and electric fans to show up. This is a 454 with a supercharger running 8lbs. of boost. I have also installed the new ABS brake unit that I saw on rucks when they were doing copperhead.

where did you get the billet master cylinder?

*bskylerj* · 01-15-2006, 02:49 AM

Quote:

Originally Posted by grendel

where did you get the billet master cylinder?

I saw it on the show Trucks when Stacey David was putting one on Copper Head (the truck he was doing). Here is his site http://www.staceydavid.com/ you can get on thereand look at the copper head project. The web site is in there. It is a unit made by ABS and takes the place of the power booster and the master cylinder. It comes with an electric pump and is supposed to give you 2200lbs of braking pressure. Plus it looks sweet.

Bubba4spd · 01-15-2006, 03:49 AM

Wow Keh, what a nice looking engine bay! Does she run a quarter as nice as she looks?

Russell · 01-15-2006, 04:13 AM

How it looked for a little while anyways! Back in a billion peices again while I switch to speed density, lol

Probally wind up installing a set of stock manifolds too. These headers are too loud!

HeavyD · 01-15-2006, 05:26 AM

Too loud??

Russell · 01-15-2006, 01:45 PM

Quote:

Originally Posted by HeavyD

Too loud??

If it were strictly off-road I'd keep em, but I get way too much attention from the police with them, lol

A lot of it has to do with the mufflers to, for sure, but headers always seem to tick, and my engine is built to make power between 800 - 4800 rpm, so they'll never really take advantage of the headers.

mike nutt · 01-15-2006, 07:49 PM

heres a couple of engines a buddy and i did

12-16-2005, 01:58 PM	#27
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Re: Finished Engine Pics Please just thought I would throw some of mine in here too... Attached Images __________________ 1968 C10 build in process TT LSA/6L90e/9"

12-16-2005, 02:36 PM	#28
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: Finished Engine Pics Please Mine will all be redone in about a month or so. It's all apart now waiting. It'll be a lot different I believe. Attached Images

12-16-2005, 02:58 PM	#29
cdyblu Registered User Join Date: Dec 2004 Location: Green Bay, WI Posts: 44	Re: Finished Engine Pics Please Here's a pic of my 572 cid big block Attached Images

12-16-2005, 03:09 PM	#30
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Finished Engine Pics Please Mine with the different valve covers. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system Last edited by 68Stepbed; 10-04-2007 at 10:31 PM.

12-17-2005, 02:20 PM	#31
Steelawork'n Just hang'n around Join Date: Nov 2005 Location: Camano Island WA Posts: 248	Re: Finished Engine Pics Please 68, Are those original valve covers of a 283?? __________________ Driving a '68 Chevy C20 and a '93 Astro Van. Lots and lots of mileage that I deduct each year.

12-17-2005, 03:41 PM	#32
demi Registered User Join Date: Sep 2003 Location: Arizona Posts: 305	Re: Finished Engine Pics Please How about another stock pic. Here's one of mine from a recent cruise night.

12-17-2005, 05:00 PM	#33
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Finished Engine Pics Please Nopey, they're Billet Specialties with the old logo milled in them. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

12-17-2005, 05:24 PM	#34
super72bb Senior Member Join Date: Jan 2002 Location: calgary,Alberta,Canada Posts: 387	Re: Finished Engine Pics Please Pretty much a stock look here. I hope this is useful. 1972 Shortfleet 402/Th400. Still in the making. Curt Attached Images __________________ 1972 CHEYENNE SUPER SWB BLACK. 402 BB, TH400, AIR, TILT, TACH, BUCKETS, CRUISE, AM/FM, 8 TRACK. My build thread: http://67-72chevytrucks.com/vboard/s...=1#post7120181

12-17-2005, 07:45 PM	#35
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Finished Engine Pics Please Heres mine not real pretty but it is a daily driver.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-26-2005, 06:38 PM	#36
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: Finished Engine Pics Please Finally got off my butt to snap a pic, but the motor's not done yet.... __________________ -Bret 67 short-fleet sold!

12-26-2005, 09:24 PM	#37
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Finished Engine Pics Please Here is a pic of my old motor, going to dyno and pick up my new one on the 28th. It will have alot more power and a more serious look. Attached Images __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs Last edited by 71Dragtruck; 12-26-2005 at 09:25 PM.

12-31-2005, 09:33 PM	#38
Steelawork'n Just hang'n around Join Date: Nov 2005 Location: Camano Island WA Posts: 248	Re: Finished Engine Pics Please Ok, now I'm finally going to load my beater pics: Still kind of rough. __________________ Driving a '68 Chevy C20 and a '93 Astro Van. Lots and lots of mileage that I deduct each year.

01-01-2006, 01:14 AM	#39
bskylerj Account Suspended Join Date: Dec 2005 Location: SPOKANE, WASHINGTON Posts: 1,001	Re: Finished Engine Pics Please Here is some pictures of my 71 super. It is almost done. I am waiting for my aluminum radiator and electric fans to show up. This is a 454 with a supercharger running 8lbs. of boost. I have also installed the new ABS brake unit that I saw on rucks when they were doing copperhead. Attached Images

01-01-2006, 11:30 PM	#40
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Finished Engine Pics Please Good reference pics in this post. I like it. I am amazed at how different engine bays look. Thanks for the pics! __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

01-02-2006, 12:12 PM	#41
lngbed71 Nothing fits but the oil Join Date: Mar 2003 Location: Gaston, Indiana Posts: 424	Re: Finished Engine Pics Please Here's mine Attached Images __________________ Land of the free Because of the brave



Register or Log In To remove these advertisements.

01-03-2006, 02:30 AM	#42
bskylerj Account Suspended Join Date: Dec 2005 Location: SPOKANE, WASHINGTON Posts: 1,001	Re: Finished Engine Pics Please That looks great lngbed71.

01-15-2006, 03:49 AM	#46
Bubba4spd Registered User Join Date: Sep 2005 Location: S. Georgia Posts: 254	Re: Finished Engine Pics Please Wow Keh, what a nice looking engine bay! Does she run a quarter as nice as she looks?

01-15-2006, 04:13 AM	#47
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: Finished Engine Pics Please How it looked for a little while anyways! Back in a billion peices again while I switch to speed density, lol Probally wind up installing a set of stock manifolds too. These headers are too loud! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 01-15-2006 at 04:13 AM.

01-15-2006, 05:26 AM	#48
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Re: Finished Engine Pics Please Too loud?? __________________ "You can take the man out of PA, but you can't take PA out of the man"

01-15-2006, 07:49 PM	#50
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: Finished Engine Pics Please heres a couple of engines a buddy and i did Last edited by mike nutt; 02-22-2009 at 08:56 PM.

Register or Log In To remove these advertisements.