question about 4wd front axle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gregbr · 05-01-2006, 09:54 PM

Did the 68 factory 4wd front axle have the closed knuckle design? If so, could it have power steering (power steering box, not the cylinder type)? I'm looking for the best way to convert my 67 4wd to power steering? And yes, I have read all about the spacers and beating the frame....etc. Just curious about the knuckle idea since the axle steering arms are different between power and manual setups. Thanks, Greg

JAKES 68GMC · 05-01-2006, 10:00 PM

68 would have a closed knuckle. Some of the 69's were closed, too.

As far as PS goes, I think you just dent the frame for a 69-72 box, drill a hole, and bolt it right in. Thats how I've understood it. Here's a link: http://67-72chevytrucks.com/vboard/s...d.php?t=192229

Paul M · 05-02-2006, 02:16 AM

got the closed axle on my 68 and the ps setup works great.previous owner installed the ps gear box,so not sure what was involved,but can check it out a bit for you if needed and snap a pic or 2 if ya like.

gregbr · 05-02-2006, 11:15 PM

Yes I could use some pics. My 67 closed knuckle has a different steering arm than the later ones with power steering. I'm not sure what is needed off a P/S truck to convert it. I can figure out the mounting and all that, but I'm not sure about the linkage from the steering box to the front axle. ANy details would be great. Will check out the link listed also. THANKS, Greg

**special-K** · 05-03-2006, 06:58 AM

The drag link wasn`t adjustable originally.But,you can get an adjustable one now if it doesn`t already have one.

05-01-2006, 09:54 PM	#1
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	question about 4wd front axle Did the 68 factory 4wd front axle have the closed knuckle design? If so, could it have power steering (power steering box, not the cylinder type)? I'm looking for the best way to convert my 67 4wd to power steering? And yes, I have read all about the spacers and beating the frame....etc. Just curious about the knuckle idea since the axle steering arms are different between power and manual setups. Thanks, Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-01-2006, 10:00 PM	#2
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,212	Re: question about 4wd front axle 68 would have a closed knuckle. Some of the 69's were closed, too. As far as PS goes, I think you just dent the frame for a 69-72 box, drill a hole, and bolt it right in. Thats how I've understood it. Here's a link: http://67-72chevytrucks.com/vboard/s...d.php?t=192229

05-02-2006, 02:16 AM	#3
Paul M Junior Member Join Date: Jun 2000 Location: Oakridge, Oregon Posts: 138	Re: question about 4wd front axle got the closed axle on my 68 and the ps setup works great.previous owner installed the ps gear box,so not sure what was involved,but can check it out a bit for you if needed and snap a pic or 2 if ya like.

05-02-2006, 11:15 PM	#4
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: question about 4wd front axle Yes I could use some pics. My 67 closed knuckle has a different steering arm than the later ones with power steering. I'm not sure what is needed off a P/S truck to convert it. I can figure out the mounting and all that, but I'm not sure about the linkage from the steering box to the front axle. ANy details would be great. Will check out the link listed also. THANKS, Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-03-2006, 06:58 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: question about 4wd front axle The drag link wasn`t adjustable originally.But,you can get an adjustable one now if it doesn`t already have one. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.