Best spark plug wire loom? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CoryM · 05-16-2002, 09:58 PM

Howdy, Im sick of wires always looking so sloppy, whats a good loom for a sb with headers? I need the wires to go from the middle between 2 header tubes (right where the valvecover bolts are) and then spread out the the plugs if you know what I mean.
I have a decent set of chrome holders that will do that though, they bolt down under the valve cover bolts. Thanks for any info.
CoryM

------------------
1970 heavy duty C-10 fleetside sport truck. Vancouver B.C. Canada
http://www.geocities.com/chevroletc1070

"Take up our quarrel with the foe:
To you from failing hands we throw
The torch; be yours to hold it high."
Lieutenant Colonel John McCrae, Canadian Army

**MikeB** · 05-17-2002, 05:26 PM

Check out these guys. You can buy their stuff from Summit Racing or at most any hot rod shop.
http://www.made4uproducts.com

------------------
MikeB
69 C-10 Fleetside, mild 383, Dart Iron Eagle heads, Crane Energizer 266 cam and 1.6 roller rockers, Edelbrock Performer manifold and 600cfm carb, HEI w/ MSD components, 1986 front spindles/disc brakes, Vintage Air in-dash.

[This message has been edited by MikeB (edited May 17, 2002).]

05-16-2002, 09:58 PM	#1
CoryM Registered User Join Date: Dec 1999 Location: Surrey, B.C. , Canada Posts: 874	Best spark plug wire loom? Howdy, Im sick of wires always looking so sloppy, whats a good loom for a sb with headers? I need the wires to go from the middle between 2 header tubes (right where the valvecover bolts are) and then spread out the the plugs if you know what I mean. I have a decent set of chrome holders that will do that though, they bolt down under the valve cover bolts. Thanks for any info. CoryM ------------------ 1970 heavy duty C-10 fleetside sport truck. Vancouver B.C. Canada http://www.geocities.com/chevroletc1070 "Take up our quarrel with the foe: To you from failing hands we throw The torch; be yours to hold it high." Lieutenant Colonel John McCrae, Canadian Army __________________ 1970 heavy duty C-10 fleetside sport truck. Vancouver B.C. Canada http://www.geocities.com/chevroletc1070 "Take up our quarrel with the foe: To you from failing hands we throw The torch; be yours to hold it high." Lieutenant Colonel John McCrae, Canadian Army

05-17-2002, 05:26 PM	#2
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,571	Check out these guys. You can buy their stuff from Summit Racing or at most any hot rod shop. http://www.made4uproducts.com ------------------ MikeB 69 C-10 Fleetside, mild 383, Dart Iron Eagle heads, Crane Energizer 266 cam and 1.6 roller rockers, Edelbrock Performer manifold and 600cfm carb, HEI w/ MSD components, 1986 front spindles/disc brakes, Vintage Air in-dash. [This message has been edited by MikeB (edited May 17, 2002).] __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.