Factory, OEM carpets?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

James McClure · 01-19-2008, 09:13 PM

Hi everyone. I got a carpet from LMC and put it in yesterday only to find out it is about 2" to small side to side and it looks like crap. I don't know if it will stretch out once the weather warms up but if I can find a source for a GM OEM carpet the LMC one is history and will go into my other truck.
The LMC carpet is thin at best. I don't like the quality at all. If someone knows a source for good carpets, OEM or not, please let me know. Many thanks, jim

bigblock73 · 01-19-2008, 09:47 PM

ACC is the best IMO. CaptKaos (Chris) is a vendor and sells it.

**N2TRUX** · 01-19-2008, 09:51 PM

Quote:

Originally Posted by bigblock73

ACC is the best IMO. CaptKaos (Chris) is a vendor and sells it.

That's your answer right there...

72freak · 01-19-2008, 10:35 PM

Make sure you got what you needed..........high hump, low hump...that might explain it being too narrow.

ACC is the way to go. You cn deal with them directly

**Captkaos** · 01-20-2008, 03:10 AM

I sell ACC carpet, it is listed here, they are 126.95 + 21 shipped...
http://store.73-87chevytrucks.com/me...ory_Code=FLRNG

James McClure · 01-20-2008, 05:51 AM

Chris: Thanks man. I will probably be in touch with you when money permits. The carpets you sell just like factory OEM? I worked for GM for 33 years and from what I read above there is a high or low hump?? Danmed if I know. It's an 84 regular cab with a 4 speed manual trans and 4 WD, that make a difference? I never noticed to tell the truth. I never did a bunch of inside work on these things. I was always into the greasy parts, LOL. Thanks, jim

bigblock73 · 01-20-2008, 05:55 AM

Jim, you have a high hump trans tunnel

**lolife99** · 01-20-2008, 07:29 AM

So you probably have "low hump" carpet. I think that's the problem. Hopefully you can return it!

chev74 · 01-20-2008, 08:32 AM

i got my carpet this year from LMC for my 64 man tranny (on the floor)- ordered the high hump, but there seemed to be extra fabric/ lots of slack at the seat side of the hump. is the LMC carpet fro ACC??

tyjoja · 01-20-2008, 11:44 AM

I have a 73 1/2 ton that was originally 3 on the tree, that needs carpet. sounds like captn kaos is the way to go, do you know if mine is a low or high hump? thanks bob

**old Rusty C10** · 01-21-2008, 01:24 AM

2wd is low hump 4X4 is high hump

jeez capt you havent got enough colors to choose from LOL (kidding)

Restrorob · 01-21-2008, 02:42 AM

Hey Captkaos,

I see your carpets are from the seat forward, Do you have full coverage or know of a supplier for a quality full coverage (low tunnel) carpet ?

Thanks

chev74 · 01-21-2008, 10:09 AM

i think 2wd floor shift is high hump though. my dads was a 2wd column shift and his hump is definitely smaller

James McClure · 01-21-2008, 09:14 PM

I am going to have to figure this out somehow, mabey measure hump height or measure from floor flange to floor flange across the cab over the hump. Mabey just get the carpet for a high hump and cut off the excess at the doors. I do know I want full floor coverage, up under the seat and all. Chris, you have such s critter?

BLE 'BURBAN · 01-22-2008, 04:53 AM

Those of you with a "HIGH hump" measure your hump hiegth and post it here for all to see
Those of you with a low hump lets do the same so we ALL will know the difference. I'm going outside to measure mine right now to see how high it is.

bigblock73 · 01-22-2008, 06:43 AM

Here is a low hump (on my '73)

Restrorob · 01-22-2008, 07:03 AM

Mine measures 5" from the floor to the red line as on Jeff's, That's without carpet/insulation, 2 wd auto.....

01-19-2008, 09:13 PM	#1
James McClure One shot, one kill. Join Date: Dec 2007 Location: Saratoga Springs NY Posts: 859	Factory, OEM carpets?? Hi everyone. I got a carpet from LMC and put it in yesterday only to find out it is about 2" to small side to side and it looks like crap. I don't know if it will stretch out once the weather warms up but if I can find a source for a GM OEM carpet the LMC one is history and will go into my other truck. The LMC carpet is thin at best. I don't like the quality at all. If someone knows a source for good carpets, OEM or not, please let me know. Many thanks, jim __________________ 1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shotJim or Paladin whichever you choose.

01-19-2008, 09:47 PM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: Factory, OEM carpets?? ACC is the best IMO. CaptKaos (Chris) is a vendor and sells it. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-19-2008, 10:35 PM	#4
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Factory, OEM carpets?? Make sure you got what you needed..........high hump, low hump...that might explain it being too narrow. ACC is the way to go. You cn deal with them directly __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere! Last edited by 72freak; 01-19-2008 at 10:36 PM.

01-20-2008, 03:10 AM	#5
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: Factory, OEM carpets?? I sell ACC carpet, it is listed here, they are 126.95 + 21 shipped... http://store.73-87chevytrucks.com/me...ory_Code=FLRNG __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-20-2008, 05:51 AM	#6
James McClure One shot, one kill. Join Date: Dec 2007 Location: Saratoga Springs NY Posts: 859	Re: Factory, OEM carpets?? Chris: Thanks man. I will probably be in touch with you when money permits. The carpets you sell just like factory OEM? I worked for GM for 33 years and from what I read above there is a high or low hump?? Danmed if I know. It's an 84 regular cab with a 4 speed manual trans and 4 WD, that make a difference? I never noticed to tell the truth. I never did a bunch of inside work on these things. I was always into the greasy parts, LOL. Thanks, jim __________________ 1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shotJim or Paladin whichever you choose.

01-20-2008, 05:55 AM	#7
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: Factory, OEM carpets?? Jim, you have a high hump trans tunnel __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 01-20-2008 at 05:55 AM.

01-20-2008, 07:29 AM	#8
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	Re: Factory, OEM carpets?? So you probably have "low hump" carpet. I think that's the problem. Hopefully you can return it! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-20-2008, 08:32 AM	#9
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Re: Factory, OEM carpets?? i got my carpet this year from LMC for my 64 man tranny (on the floor)- ordered the high hump, but there seemed to be extra fabric/ lots of slack at the seat side of the hump. is the LMC carpet fro ACC?? Last edited by chev74; 01-20-2008 at 12:14 PM.

01-20-2008, 11:44 AM	#10
tyjoja Registered User Join Date: Jan 2007 Location: albany oregon Posts: 168	Re: Factory, OEM carpets?? I have a 73 1/2 ton that was originally 3 on the tree, that needs carpet. sounds like captn kaos is the way to go, do you know if mine is a low or high hump? thanks bob

01-21-2008, 01:24 AM	#11
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,281	Re: Factory, OEM carpets?? 2wd is low hump 4X4 is high hump jeez capt you havent got enough colors to choose from LOL (kidding) __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-21-2008, 02:42 AM	#12
Restrorob The One And Only !!! Join Date: Jan 2007 Location: Hole in the woods Florida Posts: 4,567	Re: Factory, OEM carpets?? Hey Captkaos, I see your carpets are from the seat forward, Do you have full coverage or know of a supplier for a quality full coverage (low tunnel) carpet ? Thanks __________________ 93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. *"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!* Last edited by Restrorob; 01-21-2008 at 02:43 AM.

01-21-2008, 10:09 AM	#13
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Re: Factory, OEM carpets?? i think 2wd floor shift is high hump though. my dads was a 2wd column shift and his hump is definitely smaller

01-21-2008, 09:14 PM	#14
James McClure One shot, one kill. Join Date: Dec 2007 Location: Saratoga Springs NY Posts: 859	Re: Factory, OEM carpets?? I am going to have to figure this out somehow, mabey measure hump height or measure from floor flange to floor flange across the cab over the hump. Mabey just get the carpet for a high hump and cut off the excess at the doors. I do know I want full floor coverage, up under the seat and all. Chris, you have such s critter? __________________ 1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shotJim or Paladin whichever you choose.

01-22-2008, 04:53 AM	#15
BLE 'BURBAN In the Forgotten far North. Join Date: Jul 2007 Location: Anchorage, Alaska Posts: 2,627	Re: Factory, OEM carpets?? Those of you with a "HIGH hump" measure your hump hiegth and post it here for all to see Those of you with a low hump lets do the same so we ALL will know the difference. I'm going outside to measure mine right now to see how high it is. __________________ 1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade

01-22-2008, 06:43 AM	#16
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: Factory, OEM carpets?? Here is a low hump (on my '73) Attached Images __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale



Register or Log In To remove these advertisements.

01-22-2008, 07:03 AM	#17
Restrorob The One And Only !!! Join Date: Jan 2007 Location: Hole in the woods Florida Posts: 4,567	Re: Factory, OEM carpets?? Mine measures 5" from the floor to the red line as on Jeff's, That's without carpet/insulation, 2 wd auto..... Attached Images __________________ 93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. *"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!* Last edited by Restrorob; 01-22-2008 at 07:05 AM.

Register or Log In To remove these advertisements.