66 slammed hearse - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe231 · 07-13-2008, 12:37 AM

Quote:

Originally Posted by kdrodworks316

Linky please, I finally got this POS lowered and on its own rubber. I dont stop or steer yet, but I am getting closer.

http://www.fatmanfab.com/

I think you have to call them, don't see them on the website

looking good!!!!

kdrodworks316 · 07-13-2008, 01:44 AM

Thanks Joe, I will give them a call. Ya, this knee slows me down a bunch. Damn lowered rig, I cant get to the ground and when I do I cant get up. Its even better when I get under it. I have the brakes all plumbed and as soon as I get some hoses for the front, it should stop. Lucky for Soba I dont have the hoses yet. Not sure what to do on the steering yet, but I have a few options. I like the cowl hood, but its just not right for this project. I am liking the visor idea more and more.

soba_03 · 07-13-2008, 03:10 AM

Here let me see if I can help you.... (Dinos63's Burb)

NOTE: Visor.....

joe231 · 07-13-2008, 11:39 AM

there were some repo visors on ebay awhile back, i believe, i'll look around

kdrodworks316 · 07-13-2008, 11:45 AM

I like the visor, I remember seeing the one on ebay, but he wanted like $500 or somthing for it. Hey Dino, can I have yours? LOL

joe231 · 07-13-2008, 11:48 AM

man your not keeping up with the times, dino got rid of the 'burb awhile back,

i assume the visor went with it

kdrodworks316 · 07-13-2008, 12:54 PM

look at me out of the loop, I had no idea.

joe231 · 07-13-2008, 01:29 PM

nah, you just have a life

soba_03 · 07-13-2008, 02:38 PM

Sorry, should have said that this was sold.... I hated to see it go....was a sweet burb......

Joe, see if you can find one for 60-63 with the wrap around windshield.........

joe231 · 07-13-2008, 04:22 PM

will do

kdrodworks316 · 07-13-2008, 07:53 PM

Got some brake hoses today, but need a couple of fittings to plumb them in. No biggie, all I need now is tierod ends and then adjusters to make them work. A little more rust repair to weld in and its road worthy and off to the interior shop. horah!

soba_03 · 07-13-2008, 11:21 PM

Sweet... well now you have the 62 as a doner truck for parts.... any of the steering stuff your needing on the 62? Ok anything worth saying?

kdrodworks316 · 07-13-2008, 11:32 PM

The 62 is worse than what I have.

kdrodworks316 · 07-26-2008, 01:37 PM

I got the brakes pulmbed, I should have the steering stuff this week. Its almost done! I am going to hold off on the interior and drive this baby the rest of the summer! Who wants to go cruise?

CrazyJesster · 07-26-2008, 01:49 PM

Quote:

Originally Posted by kdrodworks316

I was thinking it would a killer cooler.

Rock On!! nice idea

kdrodworks316 · 07-27-2008, 04:26 PM

ol' dirty scored some more toys for the burban. A gauge cluster with a FACTORY TACH! woo hoo! finally! also got a decent grille and front bumper. My welder is still down, so I cant finish the rust repair. may have to cruise down to my buddys place with no door and fender to finish.

joe231 · 07-27-2008, 05:14 PM

now the anticipation will kill us both!

kdrodworks316 · 07-27-2008, 06:55 PM

Man oh man, I heard that!

kdrodworks316 · 08-01-2008, 12:26 AM

The big brown truck visited me again, and dropped off some new 2 me parts for the burb. Factory Tach! Sorry the picture sucks, but I just had to share my excitement with people who dig this stuff.(my wife could care less that I just got an original 40+year old tachometer)

suzq044 · 08-02-2008, 04:10 AM

I was bored..

**Chevy Fleetside** · 08-02-2008, 11:11 AM

http://www.usbody.com/ They sell fiberglass cowl induction hoods for $499. Both 2 and 4" ...

kdrodworks316 · 08-02-2008, 04:47 PM

Quote:

Originally Posted by suzq044

I was bored..

Exactly what I had in mind! Thanks for the photoshop job

kdrodworks316 · 08-02-2008, 04:50 PM

so cool in fact, I have a new avatar!

kdrodworks316 · 08-02-2008, 05:01 PM

Quote:

Originally Posted by Chevy Fleetside

http://www.usbody.com/ They sell fiberglass cowl induction hoods for $499. Both 2 and 4" ...

Thanks for the link fleet, I have their front glass fenders and they dont fit well at all. I would hope their hoods fit better. I am not sure if I am going to do the cowl hood, but a visor for sure. Somthing like this...

**Chevy Fleetside** · 08-02-2008, 05:24 PM

Well it is good to know their stuff might not fit well.

07-13-2008, 01:44 AM	#52
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 slammed hearse Thanks Joe, I will give them a call. Ya, this knee slows me down a bunch. Damn lowered rig, I cant get to the ground and when I do I cant get up. Its even better when I get under it. I have the brakes all plumbed and as soon as I get some hoses for the front, it should stop. Lucky for Soba I dont have the hoses yet. Not sure what to do on the steering yet, but I have a few options. I like the cowl hood, but its just not right for this project. I am liking the visor idea more and more.

07-13-2008, 03:10 AM	#53
soba_03 Registered User Join Date: Sep 2007 Location: Fairdale, Kentucky Posts: 560	Re: 66 slammed hearse Here let me see if I can help you.... (Dinos63's Burb) NOTE: Visor..... Attached Images

07-13-2008, 11:39 AM	#54
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 66 slammed hearse there were some repo visors on ebay awhile back, i believe, i'll look around __________________ *CHEVY ONLY*

07-13-2008, 11:45 AM	#55
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 slammed hearse I like the visor, I remember seeing the one on ebay, but he wanted like $500 or somthing for it. Hey Dino, can I have yours? LOL

07-13-2008, 11:48 AM	#56
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 66 slammed hearse man your not keeping up with the times, dino got rid of the 'burb awhile back, i assume the visor went with it __________________ *CHEVY ONLY* Last edited by joe231; 07-13-2008 at 11:48 AM.

07-13-2008, 12:54 PM	#57
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 slammed hearse look at me out of the loop, I had no idea.

07-13-2008, 01:29 PM	#58
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 66 slammed hearse nah, you just have a life __________________ *CHEVY ONLY* Last edited by joe231; 07-13-2008 at 01:29 PM.

07-13-2008, 02:38 PM	#59
soba_03 Registered User Join Date: Sep 2007 Location: Fairdale, Kentucky Posts: 560	Re: 66 slammed hearse Sorry, should have said that this was sold.... I hated to see it go....was a sweet burb...... Joe, see if you can find one for 60-63 with the wrap around windshield......... Last edited by soba_03; 07-13-2008 at 02:39 PM.

07-13-2008, 04:22 PM	#60
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 66 slammed hearse will do __________________ *CHEVY ONLY*

07-13-2008, 07:53 PM	#61
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 slammed hearse Got some brake hoses today, but need a couple of fittings to plumb them in. No biggie, all I need now is tierod ends and then adjusters to make them work. A little more rust repair to weld in and its road worthy and off to the interior shop. horah!

07-13-2008, 11:21 PM	#62
soba_03 Registered User Join Date: Sep 2007 Location: Fairdale, Kentucky Posts: 560	Re: 66 slammed hearse Sweet... well now you have the 62 as a doner truck for parts.... any of the steering stuff your needing on the 62? Ok anything worth saying?

07-13-2008, 11:32 PM	#63
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 slammed hearse The 62 is worse than what I have. __________________ If the life I live dont kill me, then I guess I'll never die! New updated stuff at www.kdrodworks.com My site still needs help, web guys and gals pm me. the best guys in the whole world: sweet70beast, jonzcustomshop, runninlow, captainfab, and the one I havent met yet, joe231

07-26-2008, 01:37 PM	#64
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 slammed hearse I got the brakes pulmbed, I should have the steering stuff this week. Its almost done! I am going to hold off on the interior and drive this baby the rest of the summer! Who wants to go cruise? __________________ If the life I live dont kill me, then I guess I'll never die! New updated stuff at www.kdrodworks.com My site still needs help, web guys and gals pm me. the best guys in the whole world: sweet70beast, jonzcustomshop, runninlow, captainfab, and the one I havent met yet, joe231

07-27-2008, 04:26 PM	#66
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 slammed hearse ol' dirty scored some more toys for the burban. A gauge cluster with a FACTORY TACH! woo hoo! finally! also got a decent grille and front bumper. My welder is still down, so I cant finish the rust repair. may have to cruise down to my buddys place with no door and fender to finish. __________________ If the life I live dont kill me, then I guess I'll never die! New updated stuff at www.kdrodworks.com My site still needs help, web guys and gals pm me. the best guys in the whole world: sweet70beast, jonzcustomshop, runninlow, captainfab, and the one I havent met yet, joe231

07-27-2008, 05:14 PM	#67
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 66 slammed hearse now the anticipation will kill us both! __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

07-27-2008, 06:55 PM	#68
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 slammed hearse Man oh man, I heard that! __________________ If the life I live dont kill me, then I guess I'll never die! New updated stuff at www.kdrodworks.com My site still needs help, web guys and gals pm me. the best guys in the whole world: sweet70beast, jonzcustomshop, runninlow, captainfab, and the one I havent met yet, joe231 Last edited by kdrodworks316; 07-27-2008 at 06:56 PM. Reason: I dont talk good

08-01-2008, 12:26 AM	#69
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 slammed hearse The big brown truck visited me again, and dropped off some new 2 me parts for the burb. Factory Tach! Sorry the picture sucks, but I just had to share my excitement with people who dig this stuff.(my wife could care less that I just got an original 40+year old tachometer) Attached Images __________________ If the life I live dont kill me, then I guess I'll never die! New updated stuff at www.kdrodworks.com My site still needs help, web guys and gals pm me. the best guys in the whole world: sweet70beast, jonzcustomshop, runninlow, captainfab, and the one I havent met yet, joe231

08-02-2008, 04:10 AM	#70
suzq044 Resident Photoshop Nerd Join Date: Sep 2007 Location: Gordon, GA Posts: 723	Re: 66 slammed hearse I was bored.. __________________ PJ - 1966 C10 Panel -- Max² - 1964 Jeep Wagoneer Panel-delivery -- Waiting his turn

08-02-2008, 11:11 AM	#71
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,787	Re: 66 slammed hearse http://www.usbody.com/ They sell fiberglass cowl induction hoods for $499. Both 2 and 4" ... __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

08-02-2008, 04:50 PM	#73
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 slammed hearse so cool in fact, I have a new avatar! __________________ If the life I live dont kill me, then I guess I'll never die! New updated stuff at www.kdrodworks.com My site still needs help, web guys and gals pm me. the best guys in the whole world: sweet70beast, jonzcustomshop, runninlow, captainfab, and the one I havent met yet, joe231

08-02-2008, 05:24 PM	#75
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,787	Re: 66 slammed hearse Well it is good to know their stuff might not fit well. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

Register or Log In To remove these advertisements.