![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Roadside Rebuilder
Join Date: Oct 2008
Location: Southeast Portland, OR
Posts: 421
|
Master cylinder question...
So, I'm close to doing the whole rear-end/fivelug/lowering/disc conversion on my '66 Burb.
Naturally, I'm going to lose my single master cylinder in favor of a dual, with a proportioning valve. Here's the question: My '66 is already power-assisted. Can I just replace the single master cylinder, and if so what year dual do I use? Or do I have to replace the entire booster and master cylinder assembly with something '72 and up? Last edited by Oregoon; 12-30-2008 at 09:49 PM. |
![]() |
![]() |
![]() |
#2 |
Account Suspended
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
|
Re: Master cylinder question...
A 72-up dual chamber master cylinder will work with your factory power brake booster.
|
![]() |
![]() |
![]() |
#3 |
Roadside Rebuilder
Join Date: Oct 2008
Location: Southeast Portland, OR
Posts: 421
|
Re: Master cylinder question...
Thanks! That's good news for a light wallet...
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: Master cylinder question...
'71-'72 will work as a strictly "bolt-on"
some time later they changed and would no longer work with the stock booster.. just looked at a '73, they won't work here is the pic, notice it doesn't have the same deep recess as the '71-'72 ![]() the '73-up style is what was on my truck before i swapped and it wouldn't work with the booster here is mine it is for a '71, got it from Auto-Zone $38 for new, not reman LINKY ![]()
__________________
![]() ![]() Last edited by joe231; 12-31-2008 at 07:47 PM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|