|
01-01-2009, 09:31 PM
|
#1 |
|
Registered User
Join Date: Jan 2009
Location: Foresthill California
Posts: 70
|
new member
Just a few words from Foresthill CA. Happy to find this site, didn't know how many are interested in older GM products! Presently starting down the road of transferring 1968 C20 sheet metal to a 1977 GMC K2500 frame. The 1977 has 4.10 gears. Dana 44 up front and a 14 bolt Gm in the rear. The power will come from a 396 that is now a 408 cu.in. This will be bolted to a SM465 with a NP205. At this point there are still many decisions to be made as to fit and placement of sheet metal. My older brother Craig is the head engineer on this project. He is a good fabricator,welder and did all the engine assembly. We had the good fortune of firing the engine on a start up stand, man that engine just shook his driveway! I plan on pulling off all the junk from the 1977 frame that we won't be using. New springs, shocks, brake,fuel lines and a new 40 gallon tank to rest between the frame rails but, first a good degreasing and a application of POR15; anyone want to lend me $$$$$$$?!! The 1968 just needed some gas,battery and with my starter it fired up after 5 years of sitting in a field. The best part was only $200; and it has a turbo 400 + a small block 327. The engine is for sale as is the tranny. I still have the 1972 4x4 K20 that the 396 came from. This truck will be for sale shortly-it's a good builder. Found out it started life as a C20 that someone bolted 4x4 stuff to. It has a dana 44 front , corporate 10 bolt rear, with a locker, both with 4.10 gears. I guess I have my work cut out! Like most people, I'm building this as time and money allow. This started over 1 year ago, I guess I'm getting a little anxious to finish but, I know many of you folks have been at it longer than this. My intension is not a show truck but, a truck I can use for wheeling, firewood cutting and my gold mining adventures. Hope to talk to some of you gals and guys. Thanks!
Last edited by California gold 68; 01-01-2009 at 09:35 PM. |
|
|
|
01-02-2009, 12:20 AM
|
#2 |
|
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
|
Re: new member
Welcome to the board from South Mississippi!
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal.  We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
|
|
|
|
01-02-2009, 01:45 AM
|
#3 |
|
Gone Fishing
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
|
Re: new member
Welcome to the board from Texas
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop  Frame of resto has been started2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 |
|
|
|
|
01-02-2009, 01:53 AM
|
#4 |
|
Its always something!
Join Date: Aug 2005
Location: FT Worth,TX
Posts: 4,992
|
Re: new member
Welcome from FT Worth TX.
__________________
79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f*** short fleet 63 C 60 Flatbed  Member of the patina club |
|
|
|
|
01-02-2009, 02:01 AM
|
#5 |
|
Registered User
Join Date: Oct 2004
Location: Sonoma, CA
Posts: 318
|
Re: new member
Welcome from Sonoma.
|
|
|
|
|
01-02-2009, 07:19 AM
|
#6 |
|
Step Brother
Join Date: Sep 2007
Location: K-town
Posts: 4,029
|
Re: new member
 from Knoxville Tn....
|
|
|
|
|
01-02-2009, 08:28 AM
|
#7 |
|
One day...
Join Date: Apr 2008
Location: Tuttle, Ok
Posts: 9,240
|
Re: new member
from OKC!
|
|
|
|
|
01-02-2009, 08:51 AM
|
#8 |
|
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: new member
to the board from Mid-MO!!!You'll find this place to become your second home. There's tons of information, friends, parts, .... and so much more.
__________________
-Nate  1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
|
|
|
|
01-02-2009, 09:57 AM
|
#9 |
|
RIP BigDaddyDave ~7-23-09~ You will be missed~
Join Date: Aug 2007
Location: Concord NC
Posts: 1,361
|
Re: new member
Welcome to the board from North Carolina!
__________________
BigDaddyDave's Truck: http://www.flickr.com/photos/daves71chevy/ | See it in Action! |
|
|
|
|
01-02-2009, 01:20 PM
|
#10 |
|
Hey Y'all!!
Join Date: Dec 2007
Location: Bay Minette, Alabama
Posts: 1,755
|
Re: new member
 from south Alabama!
|
|
|
|
|
01-02-2009, 09:17 PM
|
#11 |
|
Registered User
Join Date: Jan 2009
Location: Foresthill California
Posts: 70
|
Re: new member
Thanks for the warm welcome. Hope we get some sunshine this weekend in the foothills, I'd like to get working on my truck. I do appreciate the rain-we need it.
|
|
|
|
|
01-03-2009, 12:57 AM
|
#12 |
|
Happy Camper
Join Date: Feb 2006
Location: Northern California
Posts: 8,408
|
Re: new member
Welcome aboard from Northern California!
__________________
RIP El Jay! Love you brother! |
|
|
|
|
01-03-2009, 04:32 PM
|
#13 |
|
Step Brother
 
Join Date: Sep 2007
Location: knoxville TN
Posts: 1,950
|
Re: new member
FROM KNOXVILLE TN!!!
__________________
 Joe
|
|
|
|
|
01-11-2009, 02:10 AM
|
#14 |
|
Registered User
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
|
Re: new member
Welcome from the Central Coast - lots of Californians here.
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD  Click here to support the board Philippians 4: 6-7 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
