Any luck with Repro Molding on eBay? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cedorris · 02-25-2009, 05:34 PM

I've been looking for new lower molding for my 72 Cheyenne Super and noticed that eBay has some really low cost ($12 shipped) Wood Grain lower molding repros.

Has anyone ever tried these? If so let me know what your experience is. I bought one piece to give it a shot... Worst comes to Worst I'm out $12.

**leddzepp** · 02-25-2009, 06:32 PM

In my experience, you get what you pay for....I have heard even the best re-pop moulding does not fit that well.

On that Fee-bay stuff, just look at the shipping cost, that's where they rip you.

cedorris · 02-25-2009, 06:35 PM

Quote:

Originally Posted by leddzepp

On that Fee-bay stuff, just look at the shipping cost, that's where they rip you.

The piece was $12 INCLUDING shipping. I'm really new to this whole restoration thing... so it will be a learning experience for sure.

How are those pieces mounted?

**1970cstblazer** · 02-25-2009, 08:05 PM

I have used it with good results. The woodgrain tape is slightly different versus GM. I haven't had a fitment or durability issue. The clips that come with these mouldings are junk, so try to reuse the originals.

02-25-2009, 05:34 PM	#1
cedorris 1972 Chevy Cheyenne Super Join Date: Feb 2009 Location: Oklahoma City, OK Posts: 302	Any luck with Repro Molding on eBay? I've been looking for new lower molding for my 72 Cheyenne Super and noticed that eBay has some really low cost ($12 shipped) Wood Grain lower molding repros. Has anyone ever tried these? If so let me know what your experience is. I bought one piece to give it a shot... Worst comes to Worst I'm out $12.

02-25-2009, 06:32 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,023	Re: Any luck with Repro Molding on eBay? In my experience, you get what you pay for....I have heard even the best re-pop moulding does not fit that well. On that Fee-bay stuff, just look at the shipping cost, that's where they rip you.

02-25-2009, 08:05 PM	#4
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,692	Re: Any luck with Repro Molding on eBay? I have used it with good results. The woodgrain tape is slightly different versus GM. I haven't had a fitment or durability issue. The clips that come with these mouldings are junk, so try to reuse the originals. __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.