Weiand or Edelbrock intake for BB? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

So.Cal.Super · 03-26-2009, 03:11 PM

In case anyones wondering i have a few threads going as I am researching parts (thanks to the board and its members) for some repairs / upgrades I am doing.

Since I am replacing the cam and lifters I figured I would put a new intake on as well. I am running a q-jet so I am looking at the Weiand street warrior dual plane or the similar in the edelbrock. curious if anyone has used one or the other.

this is for a 402 BB

thanks

**1970 CST Short Wide** · 03-26-2009, 04:54 PM

My 454 loves the Edelbrock Air Gap

BCOWANWHEELS · 03-26-2009, 05:42 PM

Intake needs to match the cam rpm range

1968SWBBigBlock · 03-26-2009, 08:52 PM

I agree with BCOWANWHEELS - what cam are you running
FWIW the Edelbrock is made in the USA VS overseas for the Wieand

spinning wheels · 03-26-2009, 08:58 PM

Quote:

Originally Posted by So.Cal.Super

In case anyones wondering i have a few threads going as I am researching parts (thanks to the board and its members) for some repairs / upgrades I am doing.

Since I am replacing the cam and lifters I figured I would put a new intake on as well. I am running a q-jet so I am looking at the Weiand street warrior dual plane or the similar in the edelbrock. curious if anyone has used one or the other.

this is for a 402 BB

thanks

How big and what duration is the new bump stick?

So.Cal.Super · 03-26-2009, 09:17 PM

Per Edelbrocks Recomendation

Part Number: EDL-2162
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: Idle-5,500
Intake Duration at 050 inch Lift: 218
Exhaust Duration at 050 inch Lift: 228
Duration at 050 inch Lift: 218 int./228 exh.
Advertised Intake Duration: 292
Advertised Exhaust Duration: 302
Advertised Duration: 292 int./302 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.500 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.500 in.
Valve Lift with Factory Rocker Arm Ratio: 0.500 int./0.500 exh. lift
Lobe Separation (degrees): 114
Intake Valve Lash: 0.000 in.
Exhaust Valve Lash: 0.000 in.
Computer-Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic flat tappet

This is still my daily driver so and I am not getting into head work etc.

So my choices for intakes 1 from there tech support and 1 from weiand.

Edelbrock

Part Number: EDL-2161
Engine Block Style: Stock/OEM standard deck
Carburetor Quantity: Single
Intake Style: Dual plane
Basic Operating RPM Range: Idle-5,500
Intake Finish: Natural
Intake Material: Aluminum
EGR: No

and

Weiand

Part Number: WND-8123
Engine Block Style: Stock/OEM standard deck
Carburetor Quantity: Single
Intake Style: Dual plane
Basic Operating RPM Range: Idle-5,500
Intake Finish: Natural
Intake Material: Aluminum
EGR: No

Thanks for the input!

So.Cal.Super · 03-26-2009, 09:22 PM

Quote:

Originally Posted by 1968SWBBigBlock

I agree with BCOWANWHEELS - what cam are you running
FWIW the Edelbrock is made in the USA VS overseas for the Wieand

Weiand is overseas? Its owned by Holley and I thought made in KY?

03-26-2009, 03:11 PM	#1
So.Cal.Super It'll Buff Out! Join Date: Apr 2007 Location: San Diego Posts: 603	Weiand or Edelbrock intake for BB? In case anyones wondering i have a few threads going as I am researching parts (thanks to the board and its members) for some repairs / upgrades I am doing. Since I am replacing the cam and lifters I figured I would put a new intake on as well. I am running a q-jet so I am looking at the Weiand street warrior dual plane or the similar in the edelbrock. curious if anyone has used one or the other. this is for a 402 BB thanks __________________ "Instructions are just another mans opinion" Become a Supporting Member http://67-72chevytrucks.com/vboard/payments.php Man Card Rules http://67-72chevytrucks.com/vboard/s...d.php?t=634550 72 Chevy Cheyenne Super 400 LWB

03-26-2009, 04:54 PM	#2
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,165	Re: Weiand or Edelbrock intake for BB? My 454 loves the Edelbrock Air Gap __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

03-26-2009, 05:42 PM	#3
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Weiand or Edelbrock intake for BB? Intake needs to match the cam rpm range __________________ I BELIEVE IN JOHN 3:16

03-26-2009, 08:52 PM	#4
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Weiand or Edelbrock intake for BB? I agree with BCOWANWHEELS - what cam are you running FWIW the Edelbrock is made in the USA VS overseas for the Wieand __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

03-26-2009, 09:17 PM	#6
So.Cal.Super It'll Buff Out! Join Date: Apr 2007 Location: San Diego Posts: 603	Re: Weiand or Edelbrock intake for BB? Per Edelbrocks Recomendation Part Number: EDL-2162 Cam Style: Hydraulic flat tappet Basic Operating RPM Range: Idle-5,500 Intake Duration at 050 inch Lift: 218 Exhaust Duration at 050 inch Lift: 228 Duration at 050 inch Lift: 218 int./228 exh. Advertised Intake Duration: 292 Advertised Exhaust Duration: 302 Advertised Duration: 292 int./302 exh. Intake Valve Lift with Factory Rocker Arm Ratio: 0.500 in. Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.500 in. Valve Lift with Factory Rocker Arm Ratio: 0.500 int./0.500 exh. lift Lobe Separation (degrees): 114 Intake Valve Lash: 0.000 in. Exhaust Valve Lash: 0.000 in. Computer-Controlled Compatible: No Lifters Included: Yes Lifter Style: Hydraulic flat tappet This is still my daily driver so and I am not getting into head work etc. So my choices for intakes 1 from there tech support and 1 from weiand. Edelbrock Part Number: EDL-2161 Engine Block Style: Stock/OEM standard deck Carburetor Quantity: Single Intake Style: Dual plane Basic Operating RPM Range: Idle-5,500 Intake Finish: Natural Intake Material: Aluminum EGR: No and Weiand Part Number: WND-8123 Engine Block Style: Stock/OEM standard deck Carburetor Quantity: Single Intake Style: Dual plane Basic Operating RPM Range: Idle-5,500 Intake Finish: Natural Intake Material: Aluminum EGR: No Thanks for the input! __________________ "Instructions are just another mans opinion" Become a Supporting Member http://67-72chevytrucks.com/vboard/payments.php Man Card Rules http://67-72chevytrucks.com/vboard/s...d.php?t=634550 72 Chevy Cheyenne Super 400 LWB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.