1972 C/20 Truck parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**RPOZ11** · 05-31-2009, 04:13 PM

Sorry for being away here; too much stuff happening at home.

I had this one sold at one time to have the guy back out over time.

Here is what I have:

Location: Southern California LA area

1972 C/20 Truck.

What I have is a clear titled, California registered, Currently Non-Op'd : 1972 72 Chevy Chevrolet Bare Truck C/20 Cab.

The cab is a 1972 72 ONLY A/C Small Block Large Rear Window Cab.

$650.00 OBO

It has very minimal to NO rust at all.
The only issues are at the typical spots where the door weatherstripping is installed at - at the bottom of the driver and passenger door areas.

The rockers are VERY clean; will not be an issue as I see them.

I have the rest of this truck, but I am keeping...for now, the bed and tailgate.

The #'s matching frame I still have. It's a longbed. It is a multi-leaf rear, NOT the trailing arm set-ups.

It currently has a DANA 60 rear axle in it along with it's rear leaf springs.

I have a majority of the SBC bracketry for the engine, including I think almost ALL of the SBC A/C bracketry to install the Fridgidare A/C compressor.

I was going to make this into a small block from the big block it had in it.

The BB stuff is gone.

If there is something that you are looking for, You would have to set up a weeknite or weekend to see it.

Please be respectful of my time and availabilty to come and see this.

Serious Inquiries PLEASE!

My Loss is Your Gain!

**RPOZ11** · 05-31-2009, 04:15 PM

pics

**RPOZ11** · 05-31-2009, 04:16 PM

more pics

reefer55 · 05-31-2009, 04:28 PM

I'm looking for the air duct selector and s duct for ac cab I have attached a picture.

**RPOZ11** · 05-31-2009, 04:31 PM

Quote:

Originally Posted by reefer55

I'm looking for the air duct selector and s duct for ac cab I have attached a picture.

Ill look for you.

Let me get back to you on that!

**RPOZ11** · 05-31-2009, 04:52 PM

Quote:

Originally Posted by RPOZ11

Ill look for you.

You know, I took this whole truck apart myself, it was a runner.

I am sure it is all there!

A/C goes with everything together; It wouldnt make sense to seperate that stuff.

As I start selling this stuff off, I will assemble the A/C as a complete set-up.

**RPOZ11** · 05-31-2009, 04:54 PM

more parts I found :

**Don Brace** · 05-31-2009, 04:55 PM

Do you have the rear bumper brackets for a sport bumper?
Thanks
Don Brace MN

**RPOZ11** · 05-31-2009, 04:56 PM

more parts pics...

Glove Box Door Pic:

**RPOZ11** · 05-31-2009, 04:57 PM

Quote:

Originally Posted by Don Brace

Do you have the rear bumper brackets for a sport bumper?
Thanks
Don Brace MN

Yes along with it's bumper but that I am holding onto for now along with the bed and tailgate.

**RPOZ11** · 05-31-2009, 04:59 PM

2 sets of Ram Horn Manifolds.

The one set on the floor are MINT!

The other set, I forget where I got those...

**RPOZ11** · 05-31-2009, 05:00 PM

Doug Thorley TRI-Y's for a small block truck:

**RPOZ11** · 05-31-2009, 05:05 PM

As you see in the pics, I was going with the SBC set-up but I did aquire that 454 sitting on the frame.

That 454 is available.

I built 2 400 SBC 408 motors; either one I was going to use in this.

Both of those motors are for sale.

One 408, .040 over, has 6.0 rods and BowTie cast iron heads.
This motor is a H-EU pistons flat top piston, close chambered head build.
This one is a 4-bolt main GM block.

The other 408 is .040 over, 6.0 rods with 487 heads with 2.02 / 1.60's.
This motor is a H-EU pop up piston open chambered set-up.
This one is a 2-bolt main GM block.

sleepertruck72 · 05-31-2009, 05:50 PM

How much are you looking to get for the Dana60 axle ?

49m · 05-31-2009, 10:34 PM

how much for Doug Thorley TRI-Y's for a small block truck

**RPOZ11** · 06-01-2009, 01:16 AM

Quote:

Originally Posted by sleepertruck72

How much are you looking to get for the Dana60 axle ?

Dana 60 : $150.00

**RPOZ11** · 06-01-2009, 01:16 AM

Quote:

Originally Posted by 49m

how much for Doug Thorley TRI-Y's for a small block truck

Tri-Y's : $200 OBO

1Quick_68Chevy · 06-02-2009, 01:17 AM

any chance that I could get the lower control arms?

**RPOZ11** · 06-02-2009, 01:37 AM

Quote:

Originally Posted by 1Quick_68Chevy

any chance that I could get the lower control arms?

Those are unavailble at this time.

**paul mora** · 06-02-2009, 10:04 AM

Nice seat what condition is it in and how much. Do you have any of the door panels.

gcburdic · 06-02-2009, 12:47 PM

My friend is looking for wiring harnesses for the engine (w/ HEI and electric choke)....got that or any other harnesses available??

**RPOZ11** · 06-03-2009, 01:36 AM

Quote:

Originally Posted by paul mora

Nice seat what condition is it in and how much. Do you have any of the door panels.

The door panels are green; I THINK that I still have them.

The Seat...?

I dont know!

Shipping might be expensive on this item.

65.00

**RPOZ11** · 06-03-2009, 01:40 AM

Quote:

Originally Posted by gcburdic

My friend is looking for wiring harnesses for the engine (w/ HEI and electric choke)....got that or any other harnesses available??

HEI was not available on these models until later years, maybe 75.

Any wiring for an electronic choke would either have to be manually fabricated, or...
Have a reproduction/refurbished system wired to accomplish that!

I usually select a switched 12 Volt supply that is fused to the electronic choke when used.

When using an HEI in these, take particular NOTICE to the wire that you are using to supply that 12-Volt source.

Using a lesser amperage wire may cause either hazardous electrical fires and/or ignition failure.

The electrical demand to operate an HEI is significantly higher than a points system!

**paul mora** · 06-03-2009, 10:02 AM

I live in in Orange county so I can pick up or you can deliver what condition are they in and how much for the all or part . Yo can give me a call at 714 3238376

**D.PASSMORE** · 06-03-2009, 11:20 AM

Do you have both camper mirrors? Intrested.

05-31-2009, 04:13 PM	#1
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	1972 C/20 Truck parting out Sorry for being away here; too much stuff happening at home. I had this one sold at one time to have the guy back out over time. Here is what I have: Location: Southern California LA area 1972 C/20 Truck. What I have is a clear titled, California registered, Currently Non-Op'd : 1972 72 Chevy Chevrolet Bare Truck C/20 Cab. The cab is a 1972 72 ONLY A/C Small Block Large Rear Window Cab. $650.00 OBO It has very minimal to NO rust at all. The only issues are at the typical spots where the door weatherstripping is installed at - at the bottom of the driver and passenger door areas. The rockers are VERY clean; will not be an issue as I see them. I have the rest of this truck, but I am keeping...for now, the bed and tailgate. The #'s matching frame I still have. It's a longbed. It is a multi-leaf rear, NOT the trailing arm set-ups. It currently has a DANA 60 rear axle in it along with it's rear leaf springs. I have a majority of the SBC bracketry for the engine, including I think almost ALL of the SBC A/C bracketry to install the Fridgidare A/C compressor. I was going to make this into a small block from the big block it had in it. The BB stuff is gone. If there is something that you are looking for, You would have to set up a weeknite or weekend to see it. Please be respectful of my time and availabilty to come and see this. Serious Inquiries PLEASE! My Loss is Your Gain! Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS Last edited by RPOZ11; 05-31-2009 at 04:17 PM. Reason: Location add...

05-31-2009, 04:15 PM	#2
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Re: 1972 C/20 Truck parting out pics Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

05-31-2009, 04:16 PM	#3
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Re: 1972 C/20 Truck parting out more pics Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

05-31-2009, 04:28 PM	#4
reefer55 Registered User Join Date: Oct 2008 Location: Edmonton, alberta, canada Posts: 189	Re: 1972 C/20 Truck parting out I'm looking for the air duct selector and s duct for ac cab I have attached a picture. Attached Images

05-31-2009, 04:54 PM	#7
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Re: 1972 C/20 Truck parting out more parts I found : Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

05-31-2009, 04:55 PM	#8
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: 1972 C/20 Truck parting out Do you have the rear bumper brackets for a sport bumper? Thanks Don Brace MN __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

05-31-2009, 04:56 PM	#9
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Re: 1972 C/20 Truck parting out more parts pics... Glove Box Door Pic: Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

05-31-2009, 04:59 PM	#11
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Re: 1972 C/20 Truck parting out 2 sets of Ram Horn Manifolds. The one set on the floor are MINT! The other set, I forget where I got those... Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

05-31-2009, 05:00 PM	#12
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Re: 1972 C/20 Truck parting out Doug Thorley TRI-Y's for a small block truck: Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

05-31-2009, 05:05 PM	#13
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Re: 1972 C/20 Truck parting out As you see in the pics, I was going with the SBC set-up but I did aquire that 454 sitting on the frame. That 454 is available. I built 2 400 SBC 408 motors; either one I was going to use in this. Both of those motors are for sale. One 408, .040 over, has 6.0 rods and BowTie cast iron heads. This motor is a H-EU pistons flat top piston, close chambered head build. This one is a 4-bolt main GM block. The other 408 is .040 over, 6.0 rods with 487 heads with 2.02 / 1.60's. This motor is a H-EU pop up piston open chambered set-up. This one is a 2-bolt main GM block. __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS Last edited by RPOZ11; 05-31-2009 at 05:06 PM. Reason: sp

05-31-2009, 05:50 PM	#14
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: 1972 C/20 Truck parting out How much are you looking to get for the Dana60 axle ? __________________ 72 C20 Longbed 05 1500 Z71

05-31-2009, 10:34 PM	#15
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: 1972 C/20 Truck parting out how much for Doug Thorley TRI-Y's for a small block truck __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

06-02-2009, 01:17 AM	#18
1Quick_68Chevy Registered User Join Date: Nov 2005 Location: Illinois Posts: 11	Re: 1972 C/20 Truck parting out any chance that I could get the lower control arms?

06-02-2009, 10:04 AM	#20
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: 1972 C/20 Truck parting out Nice seat what condition is it in and how much. Do you have any of the door panels.

06-02-2009, 12:47 PM	#21
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 1972 C/20 Truck parting out My friend is looking for wiring harnesses for the engine (w/ HEI and electric choke)....got that or any other harnesses available?? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present Last edited by gcburdic; 06-02-2009 at 12:47 PM.



Register or Log In To remove these advertisements.

06-03-2009, 10:02 AM	#24
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: 1972 C/20 Truck parting out I live in in Orange county so I can pick up or you can deliver what condition are they in and how much for the all or part . Yo can give me a call at 714 3238376

06-03-2009, 11:20 AM	#25
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: 1972 C/20 Truck parting out Do you have both camper mirrors? Intrested.

Register or Log In To remove these advertisements.