|
10-10-2010, 01:20 PM
|
#1 |
|
Registered User
Join Date: Sep 2009
Location: Syracuse NY
Posts: 684
|
NP 208 Sensor
I have an NP208 Transfer case and I broke the electrical connector off of the sensor for it. This is the sensor that lights the 4x4 light on the dashboard. I went to NAPA, but they could not help me.
|
|
|
|
10-17-2010, 01:54 PM
|
#2 |
|
Registered User
Join Date: Sep 2009
Location: Syracuse NY
Posts: 684
|
Re: NP 208 Sensor
Bump. Still need this.
|
|
|
|
|
10-17-2010, 07:11 PM
|
#3 |
|
Registered User
 
Join Date: Sep 2009
Location: Upstate NY
Posts: 395
|
Re: NP 208 Sensor
I think I have one of these. It goes through the floor? or is it part of the main harness, Either way I know I have a few of them...do you just need the connector with a little bit of wire or the whole harness.
Sarge
__________________
1997 GMC Yukon Western Mid Weight Plow  |
|
|
|
|
10-17-2010, 07:47 PM
|
#4 |
|
Registered User
Join Date: Sep 2009
Location: Syracuse NY
Posts: 684
|
Re: NP 208 Sensor
Actually I have the harness that is fine, but it is the connector that screws into the top of the transfer case itself with the plug on it. If you have one of those that would be great!
|
|
|
|
|
10-18-2010, 02:01 PM
|
#5 |
|
Registered User
Join Date: Sep 2009
Location: Upstate NY
Posts: 395
|
Re: NP 208 Sensor
let me get a picture of so so we are sure we are talking about the same part for the 208
Sarge
__________________
1997 GMC Yukon Western Mid Weight Plow |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
