what can i trash? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 10-12-2003, 03:09 PM

since the engine is out of my truck now, i need to get rid of all the junk i dont need so that it will look cleaner under the hood

i know i can pull the cruise control since it didnt work to begin with and i wont ever use it, i will also pull out the electronic spark control crap. what else can i rip out?

gldevall · 10-12-2003, 03:17 PM

A/C

TIMSPEED · 10-12-2003, 05:32 PM

ALLL the smog crap!

*1FaastC10* · 10-12-2003, 06:29 PM

Quote:

Originally posted by TIMSPEED
ALLL the smog crap!

remove all the smog crap, and wire up your TCC lockup like Mike's website shows. that's what i did. if you come up with a creative way to cover the ESC hole, let us know.

low 84 · 10-13-2003, 02:47 AM

i removed EVERYTHING. i have 3 vacuum lines now, 1 for the distributor, 1 for the brake booster and 1 for the heater vent opener. i have removed all of the a/c stuff except for the junk on the fire wall which is being removed as soon as i get time to but the non a/c blower box on. as far as engine related wiring i removed everything but, the hot wire to distributor, the tach lead to the distributor, the oil pressure sending unit wire, and i got a 1 wire alternator and the single wire is run through the "air gap" part of my intake so you can't even see it. removed all the emmision equip liek egr, all the charcole/evap stuff, and anything else. i pretty much have an engine simpler than one that would have come out in the 60's

TIMSPEED · 10-13-2003, 07:39 AM

Quote:

Originally posted by low 84
i have 3 vacuum lines now, 1 for the distributor, 1 for the brake booster and 1 for the heater vent opener. as far as engine related wiring i removed everything but, the hot wire to distributor, the tach lead to the distributor, the oil pressure sending unit wire, and i got a 1 wire alternator, removed all the emmision equip liek egr, all the charcole/evap stuff, and anything else.

Nyah nyah! I got only one! (Vacuum Advance) My heater door is mechanical and I don't have power brakes.

But, I have the hose running to my air filter housing, and the PCV Valve tube, as well as the Charcoal Canister tube...but I have a BUNCH of wires on my firewall, and I dunno if I should/need to keep them all. Since I don't have a damn thing electronic under my hood except the Alternator, Starter, Distributor, and Electric Choke.

78SilveradoSWB · 10-13-2003, 10:16 AM

Quote:

Originally posted by TIMSPEED
ALLL the smog crap!

Isn't California pretty stringent on smog equipment? Or is Gov. Elect Swartzenegger going to loosen the "terminator" grip of the smog laws?

TIMSPEED · 10-13-2003, 10:32 AM

Quote:

Originally posted by 78SilveradoSWB
Isn't California pretty stringent on smog equipment?

They are...but once your car reaches 30 years old, it's exempt

ocbaud · 10-13-2003, 01:33 PM

Quote:

Originally posted by TIMSPEED

They are...but once your car reaches 30 years old, it's exempt

2003-1975=30???

crackajacka · 10-13-2003, 01:41 PM

lol that would be bad if u went in for an emissions test anytime in the next 2 years

Izzy · 10-13-2003, 02:10 PM

Quote:

Originally posted by ocbaud

2003-1975=30???

LOL Woops that addition is a little off.

kevhill85 · 10-13-2003, 02:28 PM

i took everything out under the hood

kevhill85 · 10-13-2003, 02:28 PM

i took everything out under the hood

kevhill85 · 10-13-2003, 02:28 PM

i took everything out under the hood

gldevall · 10-13-2003, 03:02 PM

Hey Kev, did you take everything out under the hood? LOL

Izzy · 10-13-2003, 03:15 PM

Quote:

Originally posted by gldevall
Hey Kev, did you take everything out under the hood? LOL

LOL, I'm not so sure he did. :p

kevhill85 · 10-13-2003, 03:33 PM

this dam cpu is junk .

Slonaker · 10-13-2003, 09:57 PM

Does your emissions label show it as having the "YDR emissions hose routing?" My emissions sticker is the one below.

If it does, and any of it is still in working order I'm willing to pay shipping for the AIR pump and brackets, the smog lines that go to the manifolds and the hoses that cross over the intake, and the thing that goes on the right manifold to make it warm up faster. San Antonio has been warned that we will be having visual and tailpipe inspections on all that stuff soon, but the state won't say when. Those are the items my '86 305 is missing.

ocbaud · 10-13-2003, 11:06 PM

that is what sticker i have, but sorry, most of that smog stuff has already been taken off long ago and gotten rid of

Slonaker · 10-14-2003, 12:32 AM

That's the problem around here, too. Those parts are long gone on most trucks. I'm trying to beat the rush that will happen when they start checking. We aren't exempt here until the truck is 25 years old, so I have a ways to go.

Of course I'd be pretty happy if my truck just ran right now...

Slonker

TIMSPEED · 10-14-2003, 01:47 AM

California is stupid, they call it 30 years, PLUS the current model year, so I guess you could say it's really 29 years..and my truck isn't exempt YET..as of 1/1/04 it will be though

79BIG10 · 10-14-2003, 12:46 PM

I took out all the vacuum lines except for the PCV valve, the HEI advance, the brake booster, the transmission line, and heater line. All the emissions are gone.

BTW: Oklahoma doesn't have emissions testing.

crackajacka · 10-14-2003, 03:03 PM

haha i was wondering about that.hopefully if they ever start having emmision tests my truck will be emmission's exempt

1985K10 · 10-14-2003, 05:21 PM

I Have A/C, never use it so I took the belt off. Cranks are cool, wish I had a P/W on the passenger side though!

RiverCityChevy · 10-14-2003, 08:19 PM

Heck take out the inner fenders,scrape the firewall clean, make it nekid, j/k use a big hammer...lol

10-12-2003, 03:09 PM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	what can i trash? since the engine is out of my truck now, i need to get rid of all the junk i dont need so that it will look cleaner under the hood i know i can pull the cruise control since it didnt work to begin with and i wont ever use it, i will also pull out the electronic spark control crap. what else can i rip out?

10-12-2003, 03:17 PM	#2
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	A/C __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

10-12-2003, 05:32 PM	#3
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	ALLL the smog crap! __________________ I have a few cars... See Them Here

10-13-2003, 02:47 AM	#5
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	i removed EVERYTHING. i have 3 vacuum lines now, 1 for the distributor, 1 for the brake booster and 1 for the heater vent opener. i have removed all of the a/c stuff except for the junk on the fire wall which is being removed as soon as i get time to but the non a/c blower box on. as far as engine related wiring i removed everything but, the hot wire to distributor, the tach lead to the distributor, the oil pressure sending unit wire, and i got a 1 wire alternator and the single wire is run through the "air gap" part of my intake so you can't even see it. removed all the emmision equip liek egr, all the charcole/evap stuff, and anything else. i pretty much have an engine simpler than one that would have come out in the 60's __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

10-13-2003, 01:41 PM	#10
crackajacka Stylin Join Date: Sep 2001 Location: Tuttle, OK Posts: 620	lol that would be bad if u went in for an emissions test anytime in the next 2 years __________________ Ive been traveling for some time, with my fishin pole and my bottle of shyne. Most Girls like finished products and just dont understand what a good addiction does for you http://www.paulwall.us/

10-13-2003, 02:28 PM	#12
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	i took everything out under the hood __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

10-13-2003, 03:02 PM	#15
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Hey Kev, did you take everything out under the hood? LOL __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

10-13-2003, 03:33 PM	#17
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	this dam cpu is junk . __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

10-13-2003, 09:57 PM	#18
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	Does your emissions label show it as having the "YDR emissions hose routing?" My emissions sticker is the one below. If it does, and any of it is still in working order I'm willing to pay shipping for the AIR pump and brackets, the smog lines that go to the manifolds and the hoses that cross over the intake, and the thing that goes on the right manifold to make it warm up faster. San Antonio has been warned that we will be having visual and tailpipe inspections on all that stuff soon, but the state won't say when. Those are the items my '86 305 is missing. Attached Images __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

10-13-2003, 11:06 PM	#19
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	that is what sticker i have, but sorry, most of that smog stuff has already been taken off long ago and gotten rid of

10-14-2003, 12:32 AM	#20
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	That's the problem around here, too. Those parts are long gone on most trucks. I'm trying to beat the rush that will happen when they start checking. We aren't exempt here until the truck is 25 years old, so I have a ways to go. Of course I'd be pretty happy if my truck just ran right now... Slonker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

10-14-2003, 01:47 AM	#21
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	California is stupid, they call it 30 years, PLUS the current model year, so I guess you could say it's really 29 years..and my truck isn't exempt YET..as of 1/1/04 it will be though __________________ I have a few cars... See Them Here

10-14-2003, 12:46 PM	#22
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	I took out all the vacuum lines except for the PCV valve, the HEI advance, the brake booster, the transmission line, and heater line. All the emissions are gone. BTW: Oklahoma doesn't have emissions testing. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

10-14-2003, 03:03 PM	#23
crackajacka Stylin Join Date: Sep 2001 Location: Tuttle, OK Posts: 620	haha i was wondering about that.hopefully if they ever start having emmision tests my truck will be emmission's exempt __________________ Ive been traveling for some time, with my fishin pole and my bottle of shyne. Most Girls like finished products and just dont understand what a good addiction does for you http://www.paulwall.us/

10-14-2003, 05:21 PM	#24
1985K10 Registered User Join Date: Oct 2003 Location: CT Posts: 315	I Have A/C, never use it so I took the belt off. Cranks are cool, wish I had a P/W on the passenger side though! __________________ Anthony 07 Tahoe LT 70 Chevelle 450HP 383-TH400 77 GMC Royal Sierra~Resto in progress~



Register or Log In To remove these advertisements.

10-14-2003, 08:19 PM	#25
RiverCityChevy You want it when??? Join Date: Aug 2003 Location: I live in memphis,tenn. been here for almost 30 years. Posts: 144	Heck take out the inner fenders,scrape the firewall clean, make it nekid, j/k use a big hammer...lol __________________ RiverCityChevy The more Hondas I see the more I love my Chevy Truck. If you're not out front the view never changes.

Register or Log In To remove these advertisements.