Rustbuket 67 build "Georgia" - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gdavis · 11-23-2012, 09:36 PM

Quote:

Originally Posted by 67c10rustbuket

Pic
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

I can see the up grade on the spring holders. Mine did not have the nuts only a hole. I did not thing of welding nuts like you did . I used a long bolt and lock washer and nut.

El Campo · 11-23-2012, 09:48 PM

Loving what you did on the rearend. Looks great. Also good idea on the spring holders.

**oldman3** · 11-23-2012, 09:59 PM

Nice job...Jim

Portmod7 · 12-14-2012, 06:39 PM

Lots of hard work on this one, great job so far!

suspect · 12-14-2012, 10:31 PM

I wish I was as meticulous as you are with your build. I get to impatient.
I'm going to assemble my engine Christmas weekend, I'll swing by sometime within the week to borrow those tools.

Zoomin · 12-14-2012, 11:11 PM

Ok Dan, what's the secret to posting a pic with the iPhone?
Posted via Mobile Device

67c10rustbuket · 12-22-2012, 10:34 PM

Quote:

Originally Posted by MJs69CST

That housing looks great!!

Thanks MJ!

Quote:

Originally Posted by gdavis

I can see the up grade on the spring holders. Mine did not have the nuts only a hole. I did not thing of welding nuts like you did . I used a long bolt and lock washer and nut.

Thanks, I wonder why they had them welded on one end and not the other. After fighting getting them off I though this would be a good idea.

Quote:

Originally Posted by El Campo

Loving what you did on the rearend. Looks great. Also good idea on the spring holders.

Thanks, I love the fancy welding job you did on your axle tubes, now that was slick.

Quote:

Originally Posted by oldman3

Nice job...Jim

Thanks Jim!

Quote:

Originally Posted by Portmod7

Lots of hard work on this one, great job so far!

Thanks, I love your project. All the fancy race car parts and the 4ott setup still blows my mind. You definitely think outside the mail order catalog.

Quote:

Originally Posted by suspect

I wish I was as meticulous as you are with your build. I get to impatient.
I'm going to assemble my engine Christmas weekend, I'll swing by sometime within the week to borrow those tools.

Cool brother, I think lack of money breeds patience and meticulousness

I try to do the best I can with what I have. Good thing I have you so I can recycle your old stock parts

Quote:

Originally Posted by Zoomin

Ok Dan, what's the secret to posting a pic with the iPhone?
Posted via Mobile Device

Not sure, I just did as I do from my macbook. submit reply>manage attachments> my photo album opened up and I selected the photo and it worked. maybe dumb luck. Kind of a pain to navigate on that tiny little screen. Another thing I have the Iphone4 (because i'm cheap and it was free) its camera is a 5 megapixel while the Iphone5 has an 8 megapixel camera so the file size may have something to do with it. I love your new project!!

Update with pics coming right up!

67c10rustbuket · 12-22-2012, 10:37 PM

Okay I re-re-did my patch job welding on the frame and cut some box plates with our plasma at work, welded them in.

67c10rustbuket · 12-22-2012, 10:39 PM

Frame boxing and smoothed, primer...

67c10rustbuket · 12-22-2012, 10:42 PM

I painted all the overlapping surfaces with flat black and torqued the front suspension crossmember and trans crossmember to the frame. I used the assembly manual and it says 55-75 lbs ft so Itorqued them to 70 lb ft. I could not find anything for the trans crossmember and the bolts included by GMC Pauls are grade 5 so I left them at 40 lb ft untill I find some other specs.

67c10rustbuket · 12-22-2012, 10:45 PM

First coat of paint. I am going to repaint the front crossmember gloss like the rest but I did not paint in front of it or the rear past the shock crossmember because I have more welding to do....

67c10rustbuket · 12-22-2012, 10:48 PM

Second coat. This is Tractor Supply farm and implement paint, alkyd enamel. Thick, hard, and shiny! Had my frame been in better shape and if I had fixed all the little problems before I would have much rather had it powdercoated, live and learn. It was getting dark so the pics are pretty poor as far as the lighting goes.

67c10rustbuket · 12-22-2012, 10:53 PM

I also cut the rivets for the pan hard (or track bar, what ever you want to call it), the shock mounts, and the front cross member so I can mount my sway bar brackets and I managed to fubar that job so the crossmember will be coming out so I can remove whats left of the rivets. I will be opening boxes of NEW parts very soon and ordering some more, next order will be a tracking bar from Porterbuilt

es67chevy · 12-22-2012, 10:57 PM

Glad to see it moving forward. Looks like some fine work there!

67c10rustbuket · 12-22-2012, 11:39 PM

Quote:

Originally Posted by es67chevy

Glad to see it moving forward. Looks like some fine work there!

Thanks Eric, slowly but surely!

Quote:

Originally Posted by MJs69CST

Is that implement paint sprayed on or brushed? Looking nice!!

Mmmmm Both, Originally I started with rolling and brushing with matte black then decided I liked the gloss better. I was going to use my spray gun but researched the paints msds and could not find any chemical difference in spray can vs quarts so I did the gloss in spray cans (convenience issue

). The front suspension crossmember is 100% brush/roller. it does level out well, not quite as good as POR15 but it does level and takes quite a while to dry. You can tell it is different when the gloss dries it looks and feels like POR, you can tell how thick and hard it is not at all like regular rattle can paint. I can get a pic of the part I rolled tomorrow in the sun if you like.

http://tsc.tractorsupply.com/search#...&sliredirect=1

bjcaldwe · 12-23-2012, 12:08 AM

Looks good Dan. I think i will try that paint on mine. Does it come in any other colors than black?

67c10rustbuket · 12-23-2012, 12:18 AM

Quote:

Originally Posted by bjcaldwe

Looks good Dan. I think i will try that paint on mine. Does it come in any other colors than black?

Yep, many colors, OE tractor colors. Ford/ new holland blue, Caterpillar yellow, Red, green, silver, etc. pretty stinky stuff

bjcaldwe · 12-23-2012, 12:30 AM

I worked on mine a little today. Maybe soon I can get a few parts on the frame to the paint stage.

**oldman3** · 12-23-2012, 12:41 AM

Frame is looking great, nice job...Jim

Zoomin · 12-23-2012, 01:01 AM

Quote:

Originally Posted by 67c10rustbuket

Yep, many colors, OE tractor colors. Ford/ new holland blue, Caterpillar yellow, Red, green, silver, etc. pretty stinky stuff

All those neat colors and you went with black?!?

Posted via Mental Telepathy

67c10rustbuket · 12-23-2012, 01:15 AM

Quote:

Originally Posted by Zoomin

All those neat colors and you went with black?!?

Posted via Mental Telepathy

I was thinking John Deere green would clash with the blue exterior paint

Maybe Caterpillar yellow like our fork lift at work would match, better consult the wife. My daughter thinks I should paint it purple (yuck) I guess I am a pretty safe boring honkey so a black frame it is. I want to paint the trailing arms, control arms, pan hard, and sway bar a silver or charcoal grey. I will call you next week about that seat... Can I have your biscayne now that you are done with it ?

mcbassin · 12-23-2012, 09:53 AM

Looking good Dan! Keep the pics coming
Posted via Mobile Device

suspect · 12-23-2012, 11:33 AM

Frame looks good.

**screaminchevypickup** · 12-23-2012, 11:39 AM

Looking good!
Posted via Mobile Device

El Campo · 12-23-2012, 12:21 PM

Looks good! I made the mistake of painting a frame yellow one time........ Ended up sandblasting that amarillo crap off and painting black later hahaha

11-23-2012, 09:48 PM	#352
El Campo Registered User Join Date: Jul 2011 Location: El Campo, Tx Posts: 1,246	Re: Rustbuket 67 build "Georgia" Loving what you did on the rearend. Looks great. Also good idea on the spring holders. __________________ 72 Chevy blue LWB, 99% original Oklahoma truck, 28,000 miles 72 Chevy SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=486626 (Attempt/Mistake #2) 2003 Harley Davidson Dyna Superglide with 2007 Street Bob front end 2000 Ford F350 Powerstroke 4WD CCLB, 310,000 miles running great (STOLEN St. Patricks Day 2014 AND NEVER RECOVERED) 2002 Ford F250 Powerstroke 4WD CCLB (To replace stolen one) Hook em Horns!!!

11-23-2012, 09:59 PM	#353
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Rustbuket 67 build "Georgia" Nice job...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

12-14-2012, 06:39 PM	#354
Portmod7 Registered User Join Date: Dec 2004 Location: Aztec, NM Posts: 388	Re: Rustbuket 67 build "Georgia" Lots of hard work on this one, great job so far! __________________ Super Blue - 1968 C-10 Short Stepside Fastburn 385, 4-Speed Sag. on the Column, Coleman 9" Floater w/Detroit TrueTrac

12-14-2012, 10:31 PM	#355
suspect Registered User Join Date: Jul 2011 Location: oklahoma city Posts: 692	Re: Rustbuket 67 build "Georgia" I wish I was as meticulous as you are with your build. I get to impatient. I'm going to assemble my engine Christmas weekend, I'll swing by sometime within the week to borrow those tools. __________________ Daniel 68 C10 Build http://67-72chevytrucks.com/vboard/s...d.php?t=503594 Romans 10:13 Everyone who calls on the name of the Lord will be saved.

12-14-2012, 11:11 PM	#356
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Rustbuket 67 build "Georgia" Ok Dan, what's the secret to posting a pic with the iPhone? Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

12-22-2012, 10:37 PM	#358
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: Rustbuket 67 build "Georgia" Okay I re-re-did my patch job welding on the frame and cut some box plates with our plasma at work, welded them in. Attached Images __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

12-22-2012, 10:39 PM	#359
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: Rustbuket 67 build "Georgia" Frame boxing and smoothed, primer... Attached Images __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

12-22-2012, 10:42 PM	#360
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: Rustbuket 67 build "Georgia" I painted all the overlapping surfaces with flat black and torqued the front suspension crossmember and trans crossmember to the frame. I used the assembly manual and it says 55-75 lbs ft so Itorqued them to 70 lb ft. I could not find anything for the trans crossmember and the bolts included by GMC Pauls are grade 5 so I left them at 40 lb ft untill I find some other specs. Attached Images __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

12-22-2012, 10:45 PM	#361
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: Rustbuket 67 build "Georgia" First coat of paint. I am going to repaint the front crossmember gloss like the rest but I did not paint in front of it or the rear past the shock crossmember because I have more welding to do.... Attached Images __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

12-22-2012, 10:48 PM	#362
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: Rustbuket 67 build "Georgia" Second coat. This is Tractor Supply farm and implement paint, alkyd enamel. Thick, hard, and shiny! Had my frame been in better shape and if I had fixed all the little problems before I would have much rather had it powdercoated, live and learn. It was getting dark so the pics are pretty poor as far as the lighting goes. Attached Images __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

12-22-2012, 10:53 PM	#363
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: Rustbuket 67 build "Georgia" I also cut the rivets for the pan hard (or track bar, what ever you want to call it), the shock mounts, and the front cross member so I can mount my sway bar brackets and I managed to fubar that job so the crossmember will be coming out so I can remove whats left of the rivets. I will be opening boxes of NEW parts very soon and ordering some more, next order will be a tracking bar from Porterbuilt __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

12-22-2012, 10:57 PM	#364
es67chevy Registered User Join Date: Aug 2007 Location: Bella Vista, AR Posts: 1,107	Re: Rustbuket 67 build "Georgia" Glad to see it moving forward. Looks like some fine work there! __________________ Eric 1967 C10 SWB 383 Stroker/TH400 Brother's One Piece Power Windows Shaved Doors, Markers, and Bumpers 4/6 Early Classic Drop Rear Fuel Tank (49-52 Chevy Car Tank) Surf Blue Paint Bella Vista, AR (Arkansas for those that get the 'A' states mixed up) My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=330869

12-23-2012, 12:08 AM	#366
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: Rustbuket 67 build "Georgia" Looks good Dan. I think i will try that paint on mine. Does it come in any other colors than black? __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

12-23-2012, 12:30 AM	#368
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: Rustbuket 67 build "Georgia" I worked on mine a little today. Maybe soon I can get a few parts on the frame to the paint stage. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

12-23-2012, 12:41 AM	#369
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Rustbuket 67 build "Georgia" Frame is looking great, nice job...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />



Register or Log In To remove these advertisements.

12-23-2012, 09:53 AM	#372
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Rustbuket 67 build "Georgia" Looking good Dan! Keep the pics coming Posted via Mobile Device __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-23-2012, 11:33 AM	#373
suspect Registered User Join Date: Jul 2011 Location: oklahoma city Posts: 692	Re: Rustbuket 67 build "Georgia" Frame looks good. __________________ Daniel 68 C10 Build http://67-72chevytrucks.com/vboard/s...d.php?t=503594 Romans 10:13 Everyone who calls on the name of the Lord will be saved.

12-23-2012, 11:39 AM	#374
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: Rustbuket 67 build "Georgia" Looking good! Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

12-23-2012, 12:21 PM	#375
El Campo Registered User Join Date: Jul 2011 Location: El Campo, Tx Posts: 1,246	Re: Rustbuket 67 build "Georgia" Looks good! I made the mistake of painting a frame yellow one time........ Ended up sandblasting that amarillo crap off and painting black later hahaha __________________ 72 Chevy blue LWB, 99% original Oklahoma truck, 28,000 miles 72 Chevy SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=486626 (Attempt/Mistake #2) 2003 Harley Davidson Dyna Superglide with 2007 Street Bob front end 2000 Ford F350 Powerstroke 4WD CCLB, 310,000 miles running great (STOLEN St. Patricks Day 2014 AND NEVER RECOVERED) 2002 Ford F250 Powerstroke 4WD CCLB (To replace stolen one) Hook em Horns!!!

Register or Log In To remove these advertisements.