GA another 1972 one ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**southern parts** · 06-14-2013, 08:59 PM

whats left of a 72 custom 30 with a 402/ sm465 4 spd. the engine ,trans, a/c , and most of the interior were already gone
it`s rough and wont be around here very long. none of the sheet metal is any good but it still has a few pieces on it.

ign switch with both door locks $45
black door panels, they`re dirty the pass side has some scrapes on the lower front. $65
custom 30 emblems $30
V8 400 emblems $15 1 has a broke stud
grill emblem $15
ho72 rear chunk 4.11 gear $175 single leg, not a no spin
clutch & brake pedals $35
stainless windshield trim $30
ps sector $50.
sway bar with brackets $50
softray tinted vent windows $50. pass side channel is bent.
softray tinted side glass $50
all prices are plus shipping

Undone · 06-14-2013, 09:20 PM

What size is sway bar and shipping to 30530. Thanks Dale

**gmc 2500 4x4** · 06-14-2013, 09:27 PM

intrested in any clutch linkage left?

Hard_Rain420 · 06-14-2013, 09:51 PM

Is it a 157" WB or 133" WB?

gmclonghorn · 06-14-2013, 10:11 PM

Interested in cab lights and wiring . How are the lenses? Price shipped to 92683. Thanks
Posted via Mobile Device

Matts Kustoms · 06-14-2013, 10:34 PM

Interested in the ho72 chunk if its a posi, and front frame rails if your going that far. Let me know prices and shipping to 48030
Posted via Mobile Device

Hard_Rain420 · 06-14-2013, 11:21 PM

Interested in the drive shaft if it's a 133" WB

**southern parts** · 06-15-2013, 06:48 AM

undone- the sway bar is 1.1/16" it will be a few days before I can get it off
gmc25004X4- the only piece left is the bracket that is riveted to the frame. $10 plus shipping
hard_rain420- it`s a 157"
gmclonghorn- the cab lenses are cracked and crazed, looks like rats have chewed the wiring.
matts customs- the chunk is not posi, how much of the frame rails do you need?
pics for dirtwork

crushing · 06-15-2013, 05:58 PM

Interested in antenna pending pics
Posted via Mobile Device

nobolt · 06-15-2013, 07:21 PM

how is the drivers door? any rust issues?
thanks

Fesser · 06-15-2013, 08:39 PM

I might be interested in some of the cab light lenses if GMCLonghorn isn't, even if they are crazed. I think a couple of mine are missing. Are they still in one piece? Frank

**gmc 2500 4x4** · 06-15-2013, 09:19 PM

gmc25004X4- the only piece left is the bracket that is riveted to the frame. $10 plus shipping

not sure if i need this for a bb swap?

Matts Kustoms · 06-15-2013, 09:49 PM

If its a 2wd I need from front suspension forward. Let me know

Thanks, Sam

Quote:

Originally Posted by southern parts

undone- the sway bar is 1.1/16" it will be a few days before I can get it off
gmc25004X4- the only piece left is the bracket that is riveted to the frame. $10 plus shipping
hard_rain420- it`s a 157"
gmclonghorn- the cab lenses are cracked and crazed, looks like rats have chewed the wiring.
matts customs- the chunk is not posi, how much of the frame rails do you need?
pics for dirtwork

Posted via Mobile Device

gmclonghorn · 06-15-2013, 11:20 PM

I will pass on the cab lights to fesser
Posted via Mobile Device

c20pickup · 06-15-2013, 11:39 PM

what rearend?

**southern parts** · 06-16-2013, 08:44 AM

crushing- no antenna , only the base.
nobolt- everything is rusty on this one
fesser all the cab lights are broke.
gmc25004X4- there are at least 2 different type brackets riveted to the frame. but I don't think this one is big block only.
matts customs- $40 plus shipping on the frame rails.
c20pickup- ho72 rearend, 4.11 gears

**special-K** · 06-16-2013, 09:07 AM

Could you check shipping on the differential assembly to 21771? Yeah,I know it's heavy

c20pickup · 06-16-2013, 10:09 AM

Quote:

Originally Posted by southern parts

crushing- no antenna , only the base.
nobolt- everything is rusty on this one
fesser all the cab lights are broke.
gmc25004X4- there are at least 2 different type brackets riveted to the frame. but I don't think this one is big block only.
matts customs- $40 plus shipping on the frame rails.
c20pickup- ho72 rearend, 4.11 gears

That ho have a locker? No-spin?
Posted via Mobile Device

nobolt · 06-16-2013, 11:04 AM

the 3rd member should be about 105 pounds...if that helps

I may be interested in a roof patch with the marker light area. how bad is the lip at the top of the windshield?

496bb · 06-16-2013, 03:05 PM

Which bearing does the HO third member have? And is the bearing in good shape? Can. You get some pics of the third member? I don't need shipping I could drive over and pick up.
Posted via Mobile Device

**southern parts** · 06-16-2013, 07:10 PM

special-k - Tim, I checked the ups website. calculated the shipping costs to be about $90. that's if the chunk weighs 105 lbs. tried the post office too, but they have a weight limit of 70 lbs. it`s still in the truck right now, once I get it out I can check the weight.

c20pickup- not a (no spin.)

nobolt- the roof is rusty pics added

496bb- I cant tell you about the bearings except to say it has them. can you tell from the pic?

dirtwork · 06-16-2013, 10:19 PM

Ill definitely take the rotors if they are good let me know. Ill take both saddles for sure also. Contact me to set everything up.

Matts Kustoms · 06-16-2013, 10:56 PM

I'm gonna pass on the frame rails, found them locally. Thanks though.
Sam
Posted via Mobile Device

**special-K** · 06-17-2013, 08:55 AM

About 100 bucks isn't too bad. But,if it's the diff this other feller who can pick it up wants,I'll pass it on. If not,I'll ponder a bit. I'd want it for my wrecker w/5.14s that it really doesn't need these days. Thing is I'm selling it and maybe should let the next guy worry about that. I can't stop messing with it cuz I guess I really wish I could keep it!

Hard_Rain420 · 06-18-2013, 11:06 AM

Interested in the screws for the marker lights if they're original and in good condition.

06-14-2013, 08:59 PM	#1
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	another 1972 one ton whats left of a 72 custom 30 with a 402/ sm465 4 spd. the engine ,trans, a/c , and most of the interior were already gone it`s rough and wont be around here very long. none of the sheet metal is any good but it still has a few pieces on it. ign switch with both door locks $45 black door panels, they`re dirty the pass side has some scrapes on the lower front. $65 custom 30 emblems $30 V8 400 emblems $15 1 has a broke stud grill emblem $15 ho72 rear chunk 4.11 gear $175 single leg, not a no spin clutch & brake pedals $35 stainless windshield trim $30 ps sector $50. sway bar with brackets $50 softray tinted vent windows $50. pass side channel is bent. softray tinted side glass $50 all prices are plus shipping Attached Images Last edited by southern parts; 06-18-2013 at 08:36 PM.

06-14-2013, 09:20 PM	#2
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 895	Re: another 1972 one ton What size is sway bar and shipping to 30530. Thanks Dale

06-14-2013, 09:27 PM	#3
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,959	Re: another 1972 one ton intrested in any clutch linkage left?

06-14-2013, 09:51 PM	#4
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: another 1972 one ton Is it a 157" WB or 133" WB?

06-14-2013, 10:11 PM	#5
gmclonghorn Registered User Join Date: Mar 2011 Location: Westminster, Ca Posts: 1,104	Re: another 1972 one ton Interested in cab lights and wiring . How are the lenses? Price shipped to 92683. Thanks Posted via Mobile Device

06-14-2013, 10:34 PM	#6
Matts Kustoms Registered User Join Date: Nov 2012 Location: Hazel Park, MI Posts: 76	Re: another 1972 one ton Interested in the ho72 chunk if its a posi, and front frame rails if your going that far. Let me know prices and shipping to 48030 Posted via Mobile Device

06-14-2013, 11:21 PM	#7
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: another 1972 one ton Interested in the drive shaft if it's a 133" WB

06-15-2013, 06:48 AM	#8
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: another 1972 one ton undone- the sway bar is 1.1/16" it will be a few days before I can get it off gmc25004X4- the only piece left is the bracket that is riveted to the frame. $10 plus shipping hard_rain420- it`s a 157" gmclonghorn- the cab lenses are cracked and crazed, looks like rats have chewed the wiring. matts customs- the chunk is not posi, how much of the frame rails do you need? pics for dirtwork Attached Images

06-15-2013, 05:58 PM	#9
crushing Registered User Join Date: Nov 2012 Location: Tallahassee, FL Posts: 99	Re: another 1972 one ton Interested in antenna pending pics Posted via Mobile Device __________________ 1972 Cheyenne (Major Project) 1993 Jeep Wrangler 2012 Ford F150 FX2 2012 GMC Yukon

06-15-2013, 07:21 PM	#10
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: another 1972 one ton how is the drivers door? any rust issues? thanks __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

06-15-2013, 08:39 PM	#11
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: another 1972 one ton I might be interested in some of the cab light lenses if GMCLonghorn isn't, even if they are crazed. I think a couple of mine are missing. Are they still in one piece? Frank

06-15-2013, 09:19 PM	#12
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,959	Re: another 1972 one ton gmc25004X4- the only piece left is the bracket that is riveted to the frame. $10 plus shipping not sure if i need this for a bb swap?

06-15-2013, 11:20 PM	#14
gmclonghorn Registered User Join Date: Mar 2011 Location: Westminster, Ca Posts: 1,104	Re: another 1972 one ton I will pass on the cab lights to fesser Posted via Mobile Device

06-15-2013, 11:39 PM	#15
c20pickup Registered User Join Date: Apr 2013 Location: Brighton, WI Posts: 504	Re: another 1972 one ton what rearend?

06-16-2013, 08:44 AM	#16
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: another 1972 one ton crushing- no antenna , only the base. nobolt- everything is rusty on this one fesser all the cab lights are broke. gmc25004X4- there are at least 2 different type brackets riveted to the frame. but I don't think this one is big block only. matts customs- $40 plus shipping on the frame rails. c20pickup- ho72 rearend, 4.11 gears



Register or Log In To remove these advertisements.

06-16-2013, 09:07 AM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: another 1972 one ton Could you check shipping on the differential assembly to 21771? Yeah,I know it's heavy __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-16-2013, 11:04 AM	#19
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: another 1972 one ton the 3rd member should be about 105 pounds...if that helps I may be interested in a roof patch with the marker light area. how bad is the lip at the top of the windshield? __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

06-16-2013, 03:05 PM	#20
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 283	Re: another 1972 one ton Which bearing does the HO third member have? And is the bearing in good shape? Can. You get some pics of the third member? I don't need shipping I could drive over and pick up. Posted via Mobile Device __________________ 87 3/4 Burb 454 49 Chev Fleetline Deluxe

06-16-2013, 07:10 PM	#21
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: another 1972 one ton special-k - Tim, I checked the ups website. calculated the shipping costs to be about $90. that's if the chunk weighs 105 lbs. tried the post office too, but they have a weight limit of 70 lbs. it`s still in the truck right now, once I get it out I can check the weight. c20pickup- not a (no spin.) nobolt- the roof is rusty pics added 496bb- I cant tell you about the bearings except to say it has them. can you tell from the pic? Attached Images

06-16-2013, 10:19 PM	#22
dirtwork Registered User Join Date: Jan 2012 Location: Chardon, Ohio Posts: 81	Re: another 1972 one ton Ill definitely take the rotors if they are good let me know. Ill take both saddles for sure also. Contact me to set everything up.

06-16-2013, 10:56 PM	#23
Matts Kustoms Registered User Join Date: Nov 2012 Location: Hazel Park, MI Posts: 76	Re: another 1972 one ton I'm gonna pass on the frame rails, found them locally. Thanks though. Sam Posted via Mobile Device

06-17-2013, 08:55 AM	#24
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: another 1972 one ton About 100 bucks isn't too bad. But,if it's the diff this other feller who can pick it up wants,I'll pass it on. If not,I'll ponder a bit. I'd want it for my wrecker w/5.14s that it really doesn't need these days. Thing is I'm selling it and maybe should let the next guy worry about that. I can't stop messing with it cuz I guess I really wish I could keep it! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-18-2013, 11:06 AM	#25
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: another 1972 one ton Interested in the screws for the marker lights if they're original and in good condition.

Register or Log In To remove these advertisements.