Walter DeWayne...Walt for short - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**RRR18** · 02-21-2015, 08:41 PM

Followin

**nlped** · 04-15-2015, 05:35 PM

Marquez Billet taillights and marker lights acquired

... And Les (member 70shortfleet) sent me a message today that the tilt I sent him is built, painted (factory blue color) and will ship soon.

I'll post up some pics soon

cooperhw · 04-15-2015, 05:50 PM

Very nice. Let's see them pics man. I need some inspiration to get moving again.
Subscribed.
Wayne

**nlped** · 04-15-2015, 08:25 PM

Quote:

Originally Posted by cooperhw

Very nice. Let's see them pics man. I need some inspiration to get moving again.
Subscribed.
Wayne

Yeah, I hear yah Wayne...you are a bit of a draga$$. NOT!!!

Pics of the column...

**nlped** · 04-15-2015, 08:26 PM

...

cooperhw · 04-16-2015, 01:00 PM

Quote:

Originally Posted by nlped

...

At times. Usually it's polar opposite of you guys back in the colder parts of North America. Here it's supposed to be 90* this coming weekend and we start slowing down when it goes above there. Start saying "I'll do that once it cools off".

Your column looks *****in

**nlped** · 10-25-2015, 06:34 PM

I know it's been a LONG time, but I finally did a little work on the chassis for Walt. PB extreme front & rear dropmembers, PB bolt on body drop. Drug the stuff into my man cave room to just tinker on it in the A/C

.

**nlped** · 10-25-2015, 06:43 PM

Boyd efi tank too...

**nlped** · 10-25-2015, 06:44 PM

A few more pieces/parts... Remember I'm building 2 of these.

sduckworth13 · 10-25-2015, 08:02 PM

Looking good Ed.

slowcpe · 10-25-2015, 09:20 PM

If that's our truck parts you putting a 302/351 motor in it? I spy what looks like a systemax intake

**nlped** · 10-25-2015, 09:23 PM

Quote:

Originally Posted by sduckworth13

Looking good Ed.

Thanks a lot Scott!

Quote:

Originally Posted by slowcpe

If that's our truck parts you putting a 302/351 motor in it? I spy what looks like a systemax intake

Good eye... It's actually a trickflow intake for a 351W. I'm building a 418ci FI motor for my 74 Bronco

**Hart_Rod** · 10-25-2015, 10:10 PM

Nice progress!

**nlped** · 10-25-2015, 10:20 PM

^^^ Thanks Rob. Hopefully I'm getting close to pulling the trigger on my CT41's

**Hart_Rod** · 10-25-2015, 10:23 PM

Quote:

Originally Posted by nlped

^^^ Thanks Rob. Hopefully I'm getting close to pulling the trigger on my CT41's

Sounds like you'll need 2 sets, I give multiple discounts....,

.

**nlped** · 10-25-2015, 10:57 PM

^^^. Hmmmm... Looky there.

cooperhw · 10-26-2015, 01:08 PM

Frame is looking good. Got a nice winter coming up to get stuff done inside soon.

Gus350 · 04-25-2017, 10:02 AM

Any updates on Walt and the shop.

**nlped** · 04-25-2017, 02:19 PM

Unfortunately, I really haven't done much to either. I've sold my '70 GMC and most of the parts I'd gathered for it and I've purchased quite a few additional parts for Walt. I do actually hope to finally get back around to working on him very soon.

The 'shop' turned into a cluster and is in limbo. The day after having the drainage and backfill placed we had a fluke day of thunderstorms and 4-1/2" of rain. Well, all that pressure and volume overpowered the drains and packed the dirt so quickly that the wall cracked in several places. Everyone started pointing fingers at this guy or that and my shop build came to a screaming halt. Not sure what I'll do there.

**nlped** · 12-10-2017, 12:45 AM

Still no updates on Walt. Unfortunately, I’m contemplating selling it and the EXTENSIVE collection of parts. Not sure about that yet though, as I don’t want to sell it all piecemeal.

**nlped** · 12-10-2017, 11:22 PM

Since I did make mention of my shop build in this thread, here are a few shots of how it looks today. Final dimensions are 36’x46’x14’. Not as big as I’d planned, but the lot dictated the final size. I’m still moving into it, but I’m plugging along.

**nlped** · 01-05-2018, 09:28 PM

Cool tool caddy I won while at SEMA...

NoNeck · 01-06-2018, 01:27 AM

I love your shop man. Any updates on Walt?

POP

**nlped** · 04-01-2018, 09:35 PM

Finally got Walter moved into the new shop. As soon as I finish the Falcoon I’m going to finally get started on him. No paint work, just tons of suspension, brakes & such! I’m stoked to death.

**Advanced Design** · 04-02-2018, 08:58 PM

Gotta follow along for the updates on Walt! Chassis was looking good so you should have a big jump on moving forward.

02-21-2015, 08:41 PM	#76
RRR18 Senior Member Join Date: Nov 2010 Location: Lordstown, OH / Wentzville, MO Posts: 870	Re: Walter DeWayne...Walt for short Followin __________________ '67 BAD IDEA Follow on Instagram https://www.instagram.com/rtimes3c10/ Ryan

04-15-2015, 05:35 PM	#77
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short Marquez Billet taillights and marker lights acquired ... And Les (member 70shortfleet) sent me a message today that the tilt I sent him is built, painted (factory blue color) and will ship soon. I'll post up some pics soon __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

04-15-2015, 05:50 PM	#78
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,302	Re: Walter DeWayne...Walt for short Very nice. Let's see them pics man. I need some inspiration to get moving again. Subscribed. Wayne __________________ "Life is too short to drive a boring vehicle". Later, Wayne

04-15-2015, 08:26 PM	#80
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short ... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

10-25-2015, 06:34 PM	#82
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short I know it's been a LONG time, but I finally did a little work on the chassis for Walt. PB extreme front & rear dropmembers, PB bolt on body drop. Drug the stuff into my man cave room to just tinker on it in the A/C . Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

10-25-2015, 06:43 PM	#83
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short Boyd efi tank too... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

10-25-2015, 06:44 PM	#84
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short A few more pieces/parts... Remember I'm building 2 of these. Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

10-25-2015, 08:02 PM	#85
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Walter DeWayne...Walt for short Looking good Ed. __________________ Scott

10-25-2015, 09:20 PM	#86
slowcpe Registered User Join Date: Sep 2013 Location: Evansville, IN Posts: 1,774	Re: Walter DeWayne...Walt for short If that's our truck parts you putting a 302/351 motor in it? I spy what looks like a systemax intake __________________ Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold

10-25-2015, 10:10 PM	#88
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Walter DeWayne...Walt for short Nice progress! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

10-25-2015, 10:20 PM	#89
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short ^^^ Thanks Rob. Hopefully I'm getting close to pulling the trigger on my CT41's __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

10-25-2015, 10:57 PM	#91
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short ^^^. Hmmmm... Looky there. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

10-26-2015, 01:08 PM	#92
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,302	Re: Walter DeWayne...Walt for short Frame is looking good. Got a nice winter coming up to get stuff done inside soon. __________________ "Life is too short to drive a boring vehicle". Later, Wayne

04-25-2017, 10:02 AM	#93
Gus350 68 C 10 Join Date: Aug 2010 Location: Advance ,Mo Posts: 554	Re: Walter DeWayne...Walt for short Any updates on Walt and the shop. __________________ Kevin "Life is Hard But its Harder when your Stupid" John Wayne 68 C10 70 C20 http://67-72chevytrucks.com/vboard/s....php?t=602326#

04-25-2017, 02:19 PM	#94
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short Unfortunately, I really haven't done much to either. I've sold my '70 GMC and most of the parts I'd gathered for it and I've purchased quite a few additional parts for Walt. I do actually hope to finally get back around to working on him very soon. The 'shop' turned into a cluster and is in limbo. The day after having the drainage and backfill placed we had a fluke day of thunderstorms and 4-1/2" of rain. Well, all that pressure and volume overpowered the drains and packed the dirt so quickly that the wall cracked in several places. Everyone started pointing fingers at this guy or that and my shop build came to a screaming halt. Not sure what I'll do there. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha



Register or Log In To remove these advertisements.

12-10-2017, 12:45 AM	#95
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short Still no updates on Walt. Unfortunately, I’m contemplating selling it and the EXTENSIVE collection of parts. Not sure about that yet though, as I don’t want to sell it all piecemeal. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

12-10-2017, 11:22 PM	#96
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short Since I did make mention of my shop build in this thread, here are a few shots of how it looks today. Final dimensions are 36’x46’x14’. Not as big as I’d planned, but the lot dictated the final size. I’m still moving into it, but I’m plugging along. Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

01-05-2018, 09:28 PM	#97
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short Cool tool caddy I won while at SEMA... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

01-06-2018, 01:27 AM	#98
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Walter DeWayne...Walt for short I love your shop man. Any updates on Walt? POP __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

04-01-2018, 09:35 PM	#99
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short Finally got Walter moved into the new shop. As soon as I finish the Falcoon I’m going to finally get started on him. No paint work, just tons of suspension, brakes & such! I’m stoked to death. Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

04-02-2018, 08:58 PM	#100
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: Walter DeWayne...Walt for short Gotta follow along for the updates on Walt! Chassis was looking good so you should have a big jump on moving forward. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

Register or Log In To remove these advertisements.