Walter DeWayne...Walt for short - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nlped** · 07-15-2014, 06:40 PM

Hey All,

Thought I'd introduce my new aquisition and preface this build thread with the fact that I really won't get much done to it until the weather breaks here in the MUGGY south, but I wanted to start the thread on day 1.

Truck... 1968 2wd Custom SWB Fleet. 283 (?), 3 OTT, open diff rear. Options are few...push button radio, chrome front & rear bumpers, and side trim is about all I can make out on the SPID. Original paint, motor, trans, hubcaps, wheels etc. You get the jist.

Plan... 5.3/4L60e with CTSV oil pan, PSI harness and reflashed ECU, Jeep Wrangler rear tank with A/C Delco EFI pump and s/s fuel lines rear to front, Painless harness, Inlinetube stainless hardlines and s/s braided hard to caliper & rear lines, PB Mild front Dropmember, PB rear Mild/Touring rear dropmember with PB tubular rear trailing arms, PB crossmembers, bags, Staggered 18" Boss 338's, Wilwood 14" 6-piston fronts & Wilwood 13" rear brakes, built '70-72 12 bolt (Eaton diff, 3.73's), Wilwood M/C and p/v... I ALREADY HAVE THESE PIECES SO I WILL BE USING THEM

. I have lot's of other parts, but dang if I can remember them...

Wish list includes A/C, power windows & locks, scuff & clear the paint and drive the heck out of ole Walt.

**nlped** · 07-15-2014, 06:44 PM

More pics...

**Joe Pass** · 07-15-2014, 06:47 PM

Pretty cool project..Thanks for the pictures

Xeen · 07-15-2014, 06:48 PM

I can dig it, It looks like a great ole truck.
Subbed.

**nlped** · 07-15-2014, 07:01 PM

I forgot the back story...

Bought it from the Grandson of the original owner (named Walter DeWayne "last name")...hence the inevitable name of the project. Last time Walter drove Walt was in 1984, the truck has literally been sitting in a "barn" since then. Move forward to 2014 and Grand Father died and grandson inherited the property and wasn't keen on ole Walt, so I scored him. I have the original bill of sale, books, pamphlets etc.

Did I mention that I'm STOKED!!!

**screaminchevypickup** · 07-15-2014, 07:13 PM

Great looking truck! sounds like you have some good plans for it..

litew8 · 07-15-2014, 07:34 PM

Not a lot of rust it looks like. SPID seen better days.

Oldtruckfanatic · 07-15-2014, 07:44 PM

Id kill to find a truck with that patina. Lucky !

**nlped** · 07-15-2014, 07:44 PM

Quote:

Originally Posted by screaminchevypickup

Great looking truck! sounds like you have some good plans for it..

PM'ed you

mx289 · 07-15-2014, 07:56 PM

Very cool truck Ed.
And you have some sweet plans for it.

**nlped** · 07-15-2014, 10:57 PM

Quote:

Originally Posted by Joe Pass

Pretty cool project..Thanks for the pictures

Pics are going to be plenty on this one. Thanks for the compliments

Quote:

Originally Posted by Xeen

I can dig it, It looks like a great ole truck.
Subbed.

Man, I'm so excited about this one... Thanks!!

Quote:

Originally Posted by litew8

Not a lot of rust it looks like. SPID seen better days.

SPID is certainly beat, but not much to see... Almost no options. And rust wise, it's really clean for this part of the country.

Quote:

Originally Posted by Oldtruckfanatic

Id kill to find a truck with that patina. Lucky !

Yep, when I saw it, I knew I had to have it.

Quote:

Originally Posted by mx289

Very cool truck Ed.
And you have some sweet plans for it.

Thanks Man! I'm stoked about this one.

Bennett68C10 · 07-16-2014, 06:15 AM

Nice looking truck, can't wait to see the transformation

**thelonerife** · 07-16-2014, 11:04 PM

OMG. OMG. Good Buy!

**nlped** · 07-16-2014, 11:10 PM

Quote:

Originally Posted by Bennett68C10

Nice looking truck, can't wait to see the transformation

Thanks Keith.... I'll hopefully get a real start on it really soon.

Quote:

Originally Posted by thelonerife

OMG. OMG. Good Buy!

I think so too. Thanks Chuck! Guess I'll know more when I start the transformation.

**nlped** · 07-18-2014, 06:50 PM

I've tentatively made an order for PB stuff from one of our board vendors. Mild front dropmember, tubular upper & lower control arms, trans crossmember, trailing arms & crossmember, R&P, front shock relocation brackets & 3 joint steering shaft.

**nlped** · 07-19-2014, 08:49 PM

PB trailing crossmember bought here on the site today. I need a mild md and trailing arms and I'm ready. Whoop whoop

**nlped** · 07-24-2014, 01:53 PM

Well, I got all the front PB dropmember stuff bought today from a member on here. Now all I need is a set of PB trailing arms & I'm set. Anybody

?

Bennett68C10 · 07-25-2014, 05:52 AM

Nice parts pickup, you doing mild dropmembers front and rear?

**nlped** · 07-25-2014, 11:45 AM

No, in the rear I'm only going with the 2 piece notch, so very mild drop in the rear. If, by some chance, I could find the mild rear notch & bridge, I'd go that route though.

knomadd · 07-25-2014, 12:34 PM

Nice score! I'll be following along. I like your plans, should be great when it's done.

c10Dream'n · 07-25-2014, 03:33 PM

this should be good, especially with the list of parts you mentioned.

**nlped** · 07-28-2014, 12:31 PM

And I got the PB trailing arms ordered this morning from member "LaidBackRecreations". I think that's all I need...at least for awhile

**nlped** · 08-20-2014, 05:49 PM

Well, it's been awhile since I've done anything related to ole Walt because of the newest acquisition, Chubby. But I did get over to the Fastenal store and pick up my PB front dropmember pieces & parts. Looks like everything is there, but the balljoints and CPP modular spindles aren't the '73 up pieces I was told

, so I guess I'll have to sell the spindles and buy new balljoints. I'm going to use my McGaughy big brake spindles as I don't need the extra narrow"ness" of the CPP spindles with the 1" narrower PB control arms. I was going to use them on another project, but oh well.

Just a funny picture of my pickup vehicle... My wife drove my truck to work today, so I made do

**nlped** · 08-20-2014, 06:26 PM

All I'm waiting on is my trailing arms and I'll be PB equipped. Then I'll start tearing into Walt.

soundqdoug · 08-20-2014, 07:25 PM

PLEASE don't paint it!

07-15-2014, 06:40 PM	#1
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Walter DeWayne...Walt for short Hey All, Thought I'd introduce my new aquisition and preface this build thread with the fact that I really won't get much done to it until the weather breaks here in the MUGGY south, but I wanted to start the thread on day 1. Truck... 1968 2wd Custom SWB Fleet. 283 (?), 3 OTT, open diff rear. Options are few...push button radio, chrome front & rear bumpers, and side trim is about all I can make out on the SPID. Original paint, motor, trans, hubcaps, wheels etc. You get the jist. Plan... 5.3/4L60e with CTSV oil pan, PSI harness and reflashed ECU, Jeep Wrangler rear tank with A/C Delco EFI pump and s/s fuel lines rear to front, Painless harness, Inlinetube stainless hardlines and s/s braided hard to caliper & rear lines, PB Mild front Dropmember, PB rear Mild/Touring rear dropmember with PB tubular rear trailing arms, PB crossmembers, bags, Staggered 18" Boss 338's, Wilwood 14" 6-piston fronts & Wilwood 13" rear brakes, built '70-72 12 bolt (Eaton diff, 3.73's), Wilwood M/C and p/v... I ALREADY HAVE THESE PIECES SO I WILL BE USING THEM . I have lot's of other parts, but dang if I can remember them... Wish list includes A/C, power windows & locks, scuff & clear the paint and drive the heck out of ole Walt. Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha Last edited by nlped; 04-15-2015 at 05:33 PM.

07-15-2014, 06:44 PM	#2
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short More pics... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-15-2014, 06:47 PM	#3
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: Walter DeWayne...Walt for short Pretty cool project..Thanks for the pictures

07-15-2014, 06:48 PM	#4
Xeen Registered User Join Date: Aug 2012 Location: Topeka Kansas Posts: 2,655	Re: Walter DeWayne...Walt for short I can dig it, It looks like a great ole truck. Subbed. __________________ Please call me Brian. Check out My 1972 SWB Fleetside 5.3L Vortec Restomod Build

07-15-2014, 07:01 PM	#5
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short I forgot the back story... Bought it from the Grandson of the original owner (named Walter DeWayne "last name")...hence the inevitable name of the project. Last time Walter drove Walt was in 1984, the truck has literally been sitting in a "barn" since then. Move forward to 2014 and Grand Father died and grandson inherited the property and wasn't keen on ole Walt, so I scored him. I have the original bill of sale, books, pamphlets etc. Did I mention that I'm STOKED!!! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-15-2014, 07:13 PM	#6
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: Walter DeWayne...Walt for short Great looking truck! sounds like you have some good plans for it.. __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

07-15-2014, 07:34 PM	#7
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Walter DeWayne...Walt for short Not a lot of rust it looks like. SPID seen better days. __________________ project: "my happy mess"

07-15-2014, 07:44 PM	#8
Oldtruckfanatic Truck junkie Join Date: May 2006 Location: Reno NV Posts: 697	Re: Walter DeWayne...Walt for short Id kill to find a truck with that patina. Lucky !

07-15-2014, 07:56 PM	#10
mx289 Registered User Join Date: May 2013 Location: wall,nj Posts: 865	Re: Walter DeWayne...Walt for short Very cool truck Ed. And you have some sweet plans for it. __________________ Tom 71 K2500 71 K5 Jimmy

07-16-2014, 06:15 AM	#12
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Walter DeWayne...Walt for short Nice looking truck, can't wait to see the transformation __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

07-16-2014, 11:04 PM	#13
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Walter DeWayne...Walt for short OMG. OMG. Good Buy! __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

07-18-2014, 06:50 PM	#15
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short I've tentatively made an order for PB stuff from one of our board vendors. Mild front dropmember, tubular upper & lower control arms, trans crossmember, trailing arms & crossmember, R&P, front shock relocation brackets & 3 joint steering shaft. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-19-2014, 08:49 PM	#16
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short PB trailing crossmember bought here on the site today. I need a mild md and trailing arms and I'm ready. Whoop whoop __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-24-2014, 01:53 PM	#17
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short Well, I got all the front PB dropmember stuff bought today from a member on here. Now all I need is a set of PB trailing arms & I'm set. Anybody ? __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-25-2014, 05:52 AM	#18
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Walter DeWayne...Walt for short Nice parts pickup, you doing mild dropmembers front and rear? __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10



Register or Log In To remove these advertisements.

07-25-2014, 11:45 AM	#19
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short No, in the rear I'm only going with the 2 piece notch, so very mild drop in the rear. If, by some chance, I could find the mild rear notch & bridge, I'd go that route though. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-25-2014, 12:34 PM	#20
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Walter DeWayne...Walt for short Nice score! I'll be following along. I like your plans, should be great when it's done. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

07-25-2014, 03:33 PM	#21
c10Dream'n Registered User Join Date: Dec 2012 Location: San Diego Posts: 519	Re: Walter DeWayne...Walt for short this should be good, especially with the list of parts you mentioned.

07-28-2014, 12:31 PM	#22
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short And I got the PB trailing arms ordered this morning from member "LaidBackRecreations". I think that's all I need...at least for awhile __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-20-2014, 05:49 PM	#23
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short Well, it's been awhile since I've done anything related to ole Walt because of the newest acquisition, Chubby. But I did get over to the Fastenal store and pick up my PB front dropmember pieces & parts. Looks like everything is there, but the balljoints and CPP modular spindles aren't the '73 up pieces I was told , so I guess I'll have to sell the spindles and buy new balljoints. I'm going to use my McGaughy big brake spindles as I don't need the extra narrow"ness" of the CPP spindles with the 1" narrower PB control arms. I was going to use them on another project, but oh well. Just a funny picture of my pickup vehicle... My wife drove my truck to work today, so I made do Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-20-2014, 06:26 PM	#24
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Walter DeWayne...Walt for short All I'm waiting on is my trailing arms and I'll be PB equipped. Then I'll start tearing into Walt. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-20-2014, 07:25 PM	#25
soundqdoug Registered User Join Date: Aug 2012 Location: Oxnard, CA Posts: 114	Re: Walter DeWayne...Walt for short PLEASE don't paint it!

Register or Log In To remove these advertisements.