What the €¥#%

[pimpston65]

Originally Posted by 60-66

Run a level across the frame rails , then level the engine off the carb flange to get your location right before welding , just a thought

no welding needed, just need to cut down my mount 2"
Posted via Mobile Device

[pimpston65]

Originally Posted by 60-66

Run a level across the frame rails , then level the engine off the carb flange to get your location right before welding , just a thought

plus the engine is sitting level with just the one mount

[pimpston65]

now my build can move forward!!! i cut the frame side mount down 2" and bent the ends in to make new flanges that mount to the frame. bolted it to the rubber mount, marked hole placement, drilled the holes on the frame. bolted up and BAM, its all centered and lever; perfect... BIG shout out to Jon(60-66) for the pics...

[pimpston65]

all lined up...

[pimpston65]

centered in the frame rails...