DBW Gas Pedal Adpater bracket for truck/suv pedal

[2014sierraAT]

Originally Posted by CJM72

Rob,

Bought one of your brackets way back for my LQ9 (2006 Escalade) swap into a 1972 Blazer, but it isn't working out. Any recommendations based on the pictures below? The pedal part number appears to be correct for the Escalade, but the bolt pattern is more like the Vette pedal.

Probably should have double checked it before I powder coated it! Thanks
Attachment 1755543

Attachment 1755544

Attachment 1755545

We’re you ever able to get this bracket to work? I have the same pedal assembly, looking for a better mounting solution than what I have currently.

[beaterku]

Originally Posted by beaterku

Just sent money to you sir. Thanks again!

-Nick

I finally opened the box and the bracket looks great. I do have a couple of questions. When I mount the bracket to the stock 3 holes, it shifts the DBW pedal to the left too much. Both of the holes on the left side are beyond the rib on the firewall where you are supposed to install the tek screws. The top bolt on the pedal is also blocked by the rib on the firewall. I supposed I could use a tek screw in the top hole of the pedal assembly into the rib behind.

What am I doing wrong here?

[shimpjw]

Sent Paypal payment for one bracket. Sent an email also asking for one after reading the first post in this thread, then I realized you are still selling when I shifted to the last post. Sorry, LOL. Hope you still have one I get soon?

[Hart_Rod]

Originally Posted by 2014sierraAT

We’re you ever able to get this bracket to work? I have the same pedal assembly, looking for a better mounting solution than what I have currently.

All pedals have the 67-70 and 71-72 pedal bolt pattern now.

Originally Posted by shimpjw

Sent Paypal payment for one bracket. Sent an email also asking for one after reading the first post in this thread, then I realized you are still selling when I shifted to the last post. Sorry, LOL. Hope you still have one I get soon?

Yours shipped yesterday, thank you!

[Hart_Rod]

Originally Posted by beaterku

I finally opened the box and the bracket looks great. I do have a couple of questions. When I mount the bracket to the stock 3 holes, it shifts the DBW pedal to the left too much. Both of the holes on the left side are beyond the rib on the firewall where you are supposed to install the tek screws. The top bolt on the pedal is also blocked by the rib on the firewall. I supposed I could use a tek screw in the top hole of the pedal assembly into the rib behind.

What am I doing wrong here?

I apologize for not seeing this sooner, but I started a new job at the end of the year and have been swamped. Did you figure this out? I haven't had anyone say anything about a problem like this. Please let me know.

[beaterku]

Originally Posted by Hart_Rod

I apologize for not seeing this sooner, but I started a new job at the end of the year and have been swamped. Did you figure this out? I haven't had anyone say anything about a problem like this. Please let me know.

I completely understand. We had a baby this week so I have not had a change to get in to the shop to take a look. I'll shoot you a PM.

Thanks!
Nick

[19SIKtySix]

Originally Posted by Hart_Rod

Sorry for the late response, been on vacation. Several guys have used the pedal bracket in the 60-66 trucks with some minor mods.

Good morning Hart_Rod,

I wanted to follow up with you regarding your bracket for a 64-66 C10. My pedal is out of a '03 GMC Envoy. Is there a way to verify your bracket will work with my pedal?

Or would I be able to modify so that it works?

[Jason7121]

I'll take a bracket for my 71 c10 with an 03 pedal out of a Yukon Denali. I'll send paypal

[Nick_c10]

Sent you a PM.

[SS68]

You still selling the DBW mounting brackets? have an 06 LQ9 with the plastic gas pedal. let me know so I can send the payment. Thanks

[Hart_Rod]

Originally Posted by SS68

You still selling the DBW mounting brackets? have an 06 LQ9 with the plastic gas pedal. let me know so I can send the payment. Thanks

Yes I am!

[ironfish96]

I would like to get a bracket for the 03 pedal in a 72 Blazer if they are still available. Thanks.

[Hart_Rod]

Originally Posted by ironfish96

I would like to get a bracket for the 03 pedal in a 72 Blazer if they are still available. Thanks.

They are!

[Hart_Rod]

Originally Posted by ironfish96

I would like to get a bracket for the 03 pedal in a 72 Blazer if they are still available. Thanks.

Yes they are. $100, PayPal is robhartley@aol.com. Let me know an I can get it shipped today!

[ironfish96]

Payment sent. Thanks.

[Hart_Rod]

Originally Posted by ironfish96

Payment sent. Thanks.

Shipped!

[72tutone]

Rob-
I need a 71/72. Please PM me and let me know where to send paypal.

[Hart_Rod]

Originally Posted by 72tutone

Rob-
I need a 71/72. Please PM me and let me know where to send paypal.

Robhartley@aol.com. Thanks!

[72tutone]

Originally Posted by Hart_Rod

Robhartley@aol.com. Thanks!

Payment sent! Thanks Rob

Matt

[70c10resto]

Could I get one for a 1979. I'll pay with PayPal. Thanks

[70c10resto]

*1970

[Hart_Rod]

Originally Posted by 70c10resto

Could I get one for a 1970. I'll pay with PayPal. Thanks

$100, PayPal is robhartley@aol.com. Can ship today, thanks!

[70c10resto]

Payment sent thank you.

[Hart_Rod]

Originally Posted by 70c10resto

Payment sent thank you.

Shipped! Thanks!

[72tutone]

Originally Posted by beaterku

I completely understand. We had a baby this week so I have not had a change to get in to the shop to take a look. I'll shoot you a PM.

Thanks!
Nick

I've got the same problem on my 72. Its got to be a 72 year issue. What did you do to resolve this?