KY Gmc 351e big block v6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aotte1** · 10-25-2023, 07:31 PM

GMC 1966 351E big block V6 out of a suburban that had 4 speed. Dressed pretty much as it was removed. Ran good when removed, suburban was customized reason for removal. It has PS installed and dealer installed AC parts in box (date coded 12/65). Price $500, needs to go, local pick up. Trying to sell whole to some one who needs, other wise will strip for parts. More photos if needed. AC parts are in a box not installed, under dash type unit by Eaton.

Still editing

1960chevypanel · 10-25-2023, 08:56 PM

Interested in PS including pulleys if you part out

**55-72 GM trucks** · 11-04-2023, 10:23 AM

So, These are my questions
1) is the Y pipe in tact or cut?
2) is the air cleaner not with it?
3) is the 4 speed still attached and does it come with it or available separately?

**AngryPirate** · 11-27-2023, 05:24 PM

The gentleman that owns or runs https://www.olsonsgaskets.com/ (pretty much the only place I can find oil pan gaskets for the GMC v6) needs a donor engine to reverse engineer the rear seal gasket.

I'm guessing this engine is likely the same internally as the 305 (for his purposes) with the exception of the pistons/cylinders?

You may see him pop into the classifieds.

He saved my bacon because he has gaskets for our trucks.

1960chevypanel · 11-27-2023, 06:44 PM

Quote:

Originally Posted by AngryPirate

The gentleman that owns or runs https://www.olsonsgaskets.com/ (pretty much the only place I can find oil pan gaskets for the GMC v6) needs a donor engine to reverse engineer the rear seal gasket.

I'm guessing this engine is likely the same internally as the 305 (for his purposes) with the exception of the pistons/cylinders?

You may see him pop into the classifieds.

He saved my bacon because he has gaskets for our trucks.

Where is he located?

**AngryPirate** · 11-27-2023, 06:50 PM

Quote:

Originally Posted by 1960chevypanel

Where is he located?

looking on the website it seems it might be Port Orchard, WA , which I guess isn't close to where the engine might be.

**55-72 GM trucks** · 11-30-2023, 10:53 AM

probably gonna have to do a better job of answering questions if Aotte wants to sell anything on here

**55-72 GM trucks** · 12-09-2023, 09:36 AM

PM sent Aotte - call me

**Backpayne** · 12-09-2023, 10:05 PM

I wish I could find one of these near SWMO.

**aotte1** · 12-10-2023, 11:40 PM

No y pipe, only manifold;
Air cleaner came w/engine, not sure origional.
No transmission.

I have lots going on currently, so may may be slow to respond, thanks for understanding.

**aotte1** · 07-24-2024, 12:43 PM

Engine going to scraper soon.

**Backpayne** · 07-24-2024, 10:31 PM

Quote:

Originally Posted by aotte1

Engine going to scraper soon.

Damn. If I were closer...

**55-72 GM trucks** · 07-25-2024, 08:48 AM

Quote:

Originally Posted by aotte1

Engine going to scraper soon.

Its so sad to see how the LS swapping and bagging has literally ruined the hobby by pushing out the desire to restore anything to how it came. I blame this modification over restoration mindset for killing interest in parts like your engine. I am broke after just buying the wife a car with all my expendable money but before it gets scrapped, find out what you think they'll pay over the scales and I'll pay that and I will come after it despite having two already and definitely not needing a third. I just can't let it go to scrap. 800 lb engine x Kentucky's 160 per ton scrap rate (engines and cars) gonna be about a $130 payday at the scales is my guess

jmedero · 10-06-2024, 09:06 PM

-hey man in hope you still have this. I need a few partrs off of it. My cell is 850-293-7763 and I am in Pensacola FL. I need the ac bracket, power steering bracket and pump and the crank pully. Please call me or text me and I will be happy to work it out with you. Thanks
Juan

**DPowers** · 10-06-2024, 10:15 PM

Quote:

Originally Posted by jmedero

-hey man in hope you still have this. I need a few partrs off of it. My cell is 850-293-7763 and I am in Pensacola FL. I need the ac bracket, power steering bracket and pump and the crank pully. Please call me or text me and I will be happy to work it out with you. Thanks
Juan

Almost for sure he still does. Ill text him to check the site.

**55-72 GM trucks** · 12-08-2024, 10:35 AM

Aotte ole buddy, I hope everything is OK with you and your family since we spoke a while back about me coming after the 351 engine. I see your PM box if full, and Dewayne Powers said he has your phone number and alleges he's shared my number with you via text, but seeing you not calling or texting makes me question whether Dewayne is telling me the truth or not. Dewayne says he won't send me your number so I can make arrangements to come after the engine, so I am kinda stuck until either you read this, or Dewayne does and sees he's preventing you from selling the engine, and realizes its OK to send it maybe. If you do read this, text or call 256 486 1988

There is another Member, Juan, South of me wanting the AC parts so I told him I'd go get the engine and send him what he wants. We are both kinda stuck since Dewayne is protecting your phone number for some weird reason. Maybe another member also has your contact info and will let me know.

10-25-2023, 07:31 PM	#1
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Gmc 351e big block v6 GMC 1966 351E big block V6 out of a suburban that had 4 speed. Dressed pretty much as it was removed. Ran good when removed, suburban was customized reason for removal. It has PS installed and dealer installed AC parts in box (date coded 12/65). Price $500, needs to go, local pick up. Trying to sell whole to some one who needs, other wise will strip for parts. More photos if needed. AC parts are in a box not installed, under dash type unit by Eaton. Still editing Attached Images Last edited by aotte1; 10-25-2023 at 07:43 PM.

10-25-2023, 08:56 PM	#2
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,622	Re: Gmc 351e big block v6 Interested in PS including pulleys if you part out

11-04-2023, 10:23 AM	#3
55-72 GM trucks Junior Member Join Date: Feb 2022 Location: Union Grove Alabama Posts: 98	Re: Gmc 351e big block v6 So, These are my questions 1) is the Y pipe in tact or cut? 2) is the air cleaner not with it? 3) is the 4 speed still attached and does it come with it or available separately?

11-27-2023, 05:24 PM	#4
AngryPirate Senior Member Join Date: Jan 2012 Location: Austin, TX Posts: 564	Re: Gmc 351e big block v6 The gentleman that owns or runs https://www.olsonsgaskets.com/ (pretty much the only place I can find oil pan gaskets for the GMC v6) needs a donor engine to reverse engineer the rear seal gasket. I'm guessing this engine is likely the same internally as the 305 (for his purposes) with the exception of the pistons/cylinders? You may see him pop into the classifieds. He saved my bacon because he has gaskets for our trucks.

11-30-2023, 10:53 AM	#7
55-72 GM trucks Junior Member Join Date: Feb 2022 Location: Union Grove Alabama Posts: 98	Re: Gmc 351e big block v6 probably gonna have to do a better job of answering questions if Aotte wants to sell anything on here

12-09-2023, 09:36 AM	#8
55-72 GM trucks Junior Member Join Date: Feb 2022 Location: Union Grove Alabama Posts: 98	Re: Gmc 351e big block v6 PM sent Aotte - call me

12-09-2023, 10:05 PM	#9
Backpayne Senior Member Join Date: Nov 2015 Location: Seligman, MO Posts: 644	Re: Gmc 351e big block v6 I wish I could find one of these near SWMO.

12-10-2023, 11:40 PM	#10
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: Gmc 351e big block v6 No y pipe, only manifold; Air cleaner came w/engine, not sure origional. No transmission. I have lots going on currently, so may may be slow to respond, thanks for understanding. Last edited by aotte1; 12-14-2023 at 03:29 AM.

07-24-2024, 12:43 PM	#11
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: Gmc 351e big block v6 Engine going to scraper soon.

10-06-2024, 09:06 PM	#14
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Gmc 351e big block v6 -hey man in hope you still have this. I need a few partrs off of it. My cell is 850-293-7763 and I am in Pensacola FL. I need the ac bracket, power steering bracket and pump and the crank pully. Please call me or text me and I will be happy to work it out with you. Thanks Juan __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

12-08-2024, 10:35 AM	#16
55-72 GM trucks Junior Member Join Date: Feb 2022 Location: Union Grove Alabama Posts: 98	Re: Gmc 351e big block v6 Aotte ole buddy, I hope everything is OK with you and your family since we spoke a while back about me coming after the 351 engine. I see your PM box if full, and Dewayne Powers said he has your phone number and alleges he's shared my number with you via text, but seeing you not calling or texting makes me question whether Dewayne is telling me the truth or not. Dewayne says he won't send me your number so I can make arrangements to come after the engine, so I am kinda stuck until either you read this, or Dewayne does and sees he's preventing you from selling the engine, and realizes its OK to send it maybe. If you do read this, text or call 256 486 1988 There is another Member, Juan, South of me wanting the AC parts so I told him I'd go get the engine and send him what he wants. We are both kinda stuck since Dewayne is protecting your phone number for some weird reason. Maybe another member also has your contact info and will let me know.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.