1971 K10 Stepside - Getting a Roller Roadworthy

[pjmoreland]

I also installed a set of Bilstein shocks. The rears are for 73-up because Bilstein doesn't make a set for 67-72 K10 trucks. Had to replace the upper mounting studs with sleeves. Pressed the studs out by pressing the sleeves in on top of them. Supported the shock eyelet with an open end wrench. Also had to spread the rear axle shock brackets to get them to accept the wider lower bushings.

[pjmoreland]

Also painted an ORD steering box brace.