![]() |
Register or Log In To remove these advertisements. |
|
|
|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Registered User
Join Date: Apr 2015
Location: East Tn (In the heart of the Smoky Mtns)
Posts: 1,993
|
Power Disc Brake install guidance
I FINALLY ordered my CCP Disc Brake conversion/upgrade.
Could anyone send me a few picture, of the orientation of the “Proportioning valve/block”. I’m putting a Factory setup in with the Booster, MC, and Prop Valve. It’s been many years since I took it off the donor truck, and can’t for the life of me remember how it went. The picture is me holding holding the Valve the way I THINK it goes. I know I need the Disc/Drum MC, and I pick it up in the morning. As I said before a couple good clear pictures of a STOCK factory system would be worth a thousand words. Thanks in advance |
|
|
|
|
|
#2 |
|
Senior Member
![]() Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 7,063
|
Re: Power Disc Brake install guidance
The rubber button goes toward the front of the truck.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
|
|
|
|
|
#3 |
|
Senior Member
![]() Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 7,063
|
Re: Power Disc Brake install guidance
Like this. Disregard the shiny piece of metal, it’s holding the button in so I can bleed the brakes. Notice the bleeder is on the top at the front. Sorry about the sideways pic.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
|
|
|
|
|
#4 |
|
Registered User
Join Date: Apr 2015
Location: East Tn (In the heart of the Smoky Mtns)
Posts: 1,993
|
Re: Power Disc Brake install guidance
Thanks. I was really scratching my behind on that one.
From the ”valve body”, does the line coming out of the rear, go to the back brakes? Then the one underneath (which is a smaller fitting) goes to the Front Brakes? Am I right in saying this? |
|
|
|
|
|
#5 |
|
Senior Member
![]() Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 7,063
|
Re: Power Disc Brake install guidance
Yes, that is correct
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
|
|
|
|
|
#6 |
|
Registered User
Join Date: Apr 2015
Location: East Tn (In the heart of the Smoky Mtns)
Posts: 1,993
|
Re: Power Disc Brake install guidance
|
|
|
|
|
|
#7 |
|
Senior Member
![]() Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 7,063
|
Re: Power Disc Brake install guidance
No problem, good luck with the install.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
|
|
|
![]() |
| Bookmarks |
|
|