OH 61GMC Parts 305/Hydromatic/Auto Column Dana44 Wheels

[Jesse72]

Hi guys selling parts from my 61 that I bought out of California. Im doing a restomod and don’t need any of this.

All this stuff can be picked up on Avon Ohio 44011. I can ship some of the smaller stuff but not the big stuff.

Motor Transmission and Column. 305/ Hydromatic with factory GMC w/ auto column. Small dent/ hole from damage in the column, I am assuming something hit it at one point. I found the broken piece inside it so it could be repaired. The column and linkage is rare. Motor and transmission are cores, have been off the road for a long time. I do not want to separate.
$800

4 Factory 15” 3 clip wheels and a 5th newer style nub wheel. I believe the 3 clip wheels are the as the 55-59 and early 60s. The hubcap style is the same. Very clean, from southern California. Tires are rollers.
$475

60-62 GMC Dana 44 I believe it to be a posi. It’s dirty and crusty, has been off the road for 40+ yr. It turns freely but I have not opened it up. Trailing arm style.
$200

Factory Trailing arms, nice shape off california truck. $200

60-62 Suburban and Panel Truck homemade hitch
$50

[Jesse72]

More pictures

[bhap]

Any idea what the ratio is on the Dana axle?

[Jesse72]

Originally Posted by bhap

Any idea what the ratio is on the Dana axle?

I do not, it needs to be pressure washed and cleaned up but it's about 5degrees out and a foot+ of snow so i haven't gotten into it. I have read that some have a 3.54 but I cannot confirm. I do know both wheels turn when i turn the pinion so its got a posi.

[MusicMan70]

How much for the double groove pulley set up on the crank?

Thank you

Shipping to 92881 CA

[Jesse72]

Originally Posted by MusicMan70

How much for the double groove pulley set up on the crank?

Thank you

Shipping to 92881 CA

I am trying to keep the motor transmission and steering column all together at this point. I can let you know if I part it out.

[Jesse72]

The Dana 44 is a 3.07 posi