![]() |
|
|
#1 |
|
Registered User
Join Date: Aug 2015
Location: kokomo,indiana
Posts: 379
|
Help with a Bracket
Hey
took this bracket off and cannot remember it went pretty sure it was under the dash on drivers side, but im not sure usually good at pictures, but this one i did not pictures would help if you have them Thank,s for any help
__________________
A Little Better Every Day Cancer Survivor, most dont know what they have until its gone, appreciate everything |
|
|
|
|
|
#2 |
|
Registered User
Join Date: Apr 2018
Location: NorCal
Posts: 46
|
Re: Help with a Bracket
Is this the bracket that mounts between the dash and the A pillar, holds the dash in place? I didn't remove my dash but it looks kinda familiar. Has the curvature of the dash. Just a guess
|
|
|
|
|
|
#3 |
|
Registered User
Join Date: Apr 2010
Location: Oregon
Posts: 1,272
|
Re: Help with a Bracket
The inner fender bolt to this, near the top of the firewall ( under the dash). It's common for them to fall off.
__________________
1951 Truck, LS1/4L60 1964 Suburban, current project |
|
|
|
|
|
#4 |
|
Registered User
Join Date: Aug 2015
Location: kokomo,indiana
Posts: 379
|
Re: Help with a Bracket
Ok
Thanks for the replies and Yes it is the support on the inside for the inner fender on the Drivers side Got another Question, is there supposed a similar bracket under the dash on the Passenger side or is it supported by something else if i cant find one, im sure i could make one out of flat steel that would work Thank,s
__________________
A Little Better Every Day Cancer Survivor, most dont know what they have until its gone, appreciate everything |
|
|
|
|
|
#5 |
|
Registered User
Join Date: Apr 2010
Location: Oregon
Posts: 1,272
|
Re: Help with a Bracket
You should have the same style for the Pass side.
__________________
1951 Truck, LS1/4L60 1964 Suburban, current project |
|
|
|
![]() |
| Bookmarks |
|
|