![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Dec 2008
Location: Oklahoma City
Posts: 447
|
Project '66 Dirtrod: K-30 Extended Cab
After almost a year in the making, I’ve decided to start a build thread on my 1966 Chevy short-bed step-side.
The thing that started the ball rolling was picking up this ‘66 C-10, the body is pretty dang straight and a little bit of light rust, but overall in great condition. ![]() After deciding to go 4x4 with it we found this Mid 80’s 1-ton truck from which we stole the frame out from under it. ![]() We picked up a 14-bolt with a Detroit locker for the rear and a Dana 60 with a limited slip up front from a CU/CV military vehicle ![]() We did a disc brake conversion on the 14 bolt and added a little bling ![]() On the Dana 60 we went with high steer arms and Hydraulic assist from PSC ![]() We pulled the body off, torched the old brackets and random parts, and got the frame all cleaned up . ![]() ![]() After painting and priming the frame with rattle cans we put on 8-inch lift springs up front and 4 inch in the back with a shackle reversal. ![]() ![]() Last edited by oklahomaduner; 10-06-2009 at 11:56 AM. |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|