GMC rear leafs and brackets on a Chevy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gene · 07-03-2009, 04:27 PM

Ok, I think I have decided to do the conversion on the rear of my truck using GMC stuff. From what I have read, GMC brackets,leafs, and shackels should bolt right up to my previously coil spring rear end with the addition of some holes? I have looked at several trucks at the salvage yard, and I see no difference between the 2wd chevy's and GMC's. So my question is this, do they sell aftermarket lift springs that will fit this setup? I am looking for 4 to 6 inches of lift.

Thanks,
Gene

07-03-2009, 04:27 PM	#1
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	GMC rear leafs and brackets on a Chevy Ok, I think I have decided to do the conversion on the rear of my truck using GMC stuff. From what I have read, GMC brackets,leafs, and shackels should bolt right up to my previously coil spring rear end with the addition of some holes? I have looked at several trucks at the salvage yard, and I see no difference between the 2wd chevy's and GMC's. So my question is this, do they sell aftermarket lift springs that will fit this setup? I am looking for 4 to 6 inches of lift. Thanks, Gene

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.