Trans and TC reinstall - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67gmcstepside · 12-01-2011, 01:46 PM

Thought I would ask those who have done this before. I had to remove the trans due to 3rd gear syncro being shot. I am ready for the re-install and thought it would be easiest to reinstall the trans with the adapter on it and after getting the cross member mounter add the TC. Seems like to much weight if I try to get the trans lined up with the throw out bearing and clutch assembly with the TC on. Does this logic make sense? Doesnt look like to much trouble getting to the adapter/TC bolts once the adaprt is on the cross member. Any thoughts?

12-01-2011, 01:46 PM	#1
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Trans and TC reinstall Thought I would ask those who have done this before. I had to remove the trans due to 3rd gear syncro being shot. I am ready for the re-install and thought it would be easiest to reinstall the trans with the adapter on it and after getting the cross member mounter add the TC. Seems like to much weight if I try to get the trans lined up with the throw out bearing and clutch assembly with the TC on. Does this logic make sense? Doesnt look like to much trouble getting to the adapter/TC bolts once the adaprt is on the cross member. Any thoughts? Last edited by 67gmcstepside; 12-01-2011 at 03:37 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.