![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Dec 2011
Location: Phoenix, AZ
Posts: 57
|
Transmission hump/transfer case shifter
Can any one help me figure out what I have in my Blazer. 1972, 4spd, np 205 transfer case.
Here is an overall shot. Guessing it is a transmission hump from an automatic based on the fact that the transmission shifter hole is just cut out. ![]() ![]() The transfer case shifter is off. When it is all the way forward in 2 lo, it is no where near the forward edge of the hole in the hump. This is all the way forward: ![]() I'm not sure the transfer case will actually move all the way back to get into 4 high. I think it is hitting the back of the hole first. I'm pretty sure this is 2 hi: ![]() Finally, I'm pretty sure it is a high hump tunnel: ![]() What do I need to do to fix this? Proper 4spd transmission hump? Correct shifter for transfer case? Thanks Sean |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|