Clifford / Holley carb linkage
So I am trying to wrap up this conversion but have a question about the linkage. I want to keep my original pedal set up and run a cable from just outside the firewall. In the picture you can see the old throttle rod that I will remove and attach the universal cable. If you look closely you can see above my return spring setup the future other end of the cable dangling. I know I need a bracket just before the carb connection for the cable sleeve. Do I need a bracket on the other end by the firewall or can I just attach the cable to the pivot on the fire wall. Thanks for any input and if you have any pics of how you did it that would be great!
|