![]() |
![]() |
#1 |
Registered User
![]() Join Date: Aug 2015
Location: kokomo,indiana
Posts: 334
|
pulley issues
Hello
ive got a 1972 c10, originally a 350/4 bolt main po had stuck a broken 305 in it when i bought it, took it out really quick found a 1979 elcamino 350/4 bolt main(got a great deal on it, Target motor, about 10000 miles on it, chrome valve covers, already painted orange, and hei ignition)with a little help from my friends ok so here's the issue, i noticed when i bought it the alternator belt was slightly off, its about a 1/4 inch,alternator is on left hand side of motor, original motor was alt on right im assuming so when i got the motor in, have not fired up yet, but heard run when bought ive got power steering also, the alt lines up perfectly with the water pump, but not the crank, same for the power steering, lines up perfectly with the water pump, neither lines up evenly with the crank pulley laid a straight edge across the power steering pulley, seems the crank pulley needs to go back towards the motor about 1/4 inch(yes , crank is seated) any help appreciated couple big car shows and swap meets this weekend, so i can probably find pulleys that i need, just dont know what to look for
__________________
A Little Better Every Day Cancer Survivor, most dont know what they have until its gone, appreciate everything |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|