Frizzle's Inner Fender Mod - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frizzle Fry · 09-17-2007, 03:37 PM

I mentioned this mod in another thread so here it is. I'm not done yet, but I'll update this thread as I go...

I want to tuck more wheel but I don't want it to look like I just welded some trailer fenders to the inside of my front fenders. Though I've seen that done and finished off nicely, I want my inners to be "stock looking" to the casual observer. I also want to be able to use the stock hood hinges.

Since I have a 68 clip that's going on Tubby I started work on those fenders. First I moved the arch (provision for inners) up 1" by sectioning the inner structure of the fenders as follows:

And the other side:

09-17-2007, 03:37 PM	#1
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Frizzle's Inner Fender Mod I mentioned this mod in another thread so here it is. I'm not done yet, but I'll update this thread as I go... I want to tuck more wheel but I don't want it to look like I just welded some trailer fenders to the inside of my front fenders. Though I've seen that done and finished off nicely, I want my inners to be "stock looking" to the casual observer. I also want to be able to use the stock hood hinges. Since I have a 68 clip that's going on Tubby I started work on those fenders. First I moved the arch (provision for inners) up 1" by sectioning the inner structure of the fenders as follows: And the other side:



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.