|
02-10-2003, 12:30 AM
|
#1 |
|
Registered User
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
|
pics of new project
here she is.
  its a 408 (.04 over 400). machine work was done by kim barr racing engines in garland, tx. it been tanked, fluxed, line honed, honed, bored, decked. should be purchasing the rest of the parts in the next two months and putting it together and dropping in this summer. heres the plans: -4340 forged 3.75 stroke scat crank -forged eagle SIR 5.7 rods -forged srp pistons -21 cc dish (9.8:1 with 64cc heads) -re using the dart iron eagle heads from the current engine -comp 274 xs solid lift cam -reusing my comp 1.52 ratio roller tip rockers -eddy rpm intake -haven't decided on carb yet, probly around 700 cfm -oh yeah and the nitrous of course 
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's |
|
|
| Bookmarks |
|
|
Threaded Mode