Buddy Bucket Parts - Buddy seats, tracks, clamps

[Chevy4Life]

I have a couple extra Buddy seats I'd like to get out of the way.

1. 1967 CST Buddy seat. The bottom seat is missing (basically a piece of 1/2" plywood and a couple inch thick piece of foam). The top foam is ok but the wood should be replaced. The PO cut a little notch in the front to add a lock. Surface rust only. $45 plus $25 shipping to the ConUS.


2. Dodge Buddy seat. The metal part is IDENTICAL to the CST box except for the 4 small holes in the front of the box that will be covered when finished. The top part of the seat looks more square than the CST seat, but it may just be the cover. I used a Dodge seat in my truck. It had a different cover and looks great with new covers (Pics below) $65 plus $25 shipping to the ConUS. SOLD


3. Driver side seat tracks. Off a Dodge seat, but very close to the CST track. The studs are a little longer and the adjuster arm is mounted farther out (Pics of both below). One of the rollers needs to be persuaded back over the nipple. Missing one spring. $40 Shipped to ConUS. SOLD


4. 3 Buddy seat hold down clamps. As a cheap alternative use 3/4" One hole electrical conduit strap. $10 each shipped or all three for $25 Shipped to ConUS.SOLD

If shipping is less than $25 on the Buddy seats I'll refund the difference, if it's more I'll eat it. For shipping outside the ConUS. PM your address for a quote but, if you want to be inline please reply in the thread.