Which bags would solve this problem?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66chevy PROSTREET · 03-28-2009, 11:40 PM

I have CPP lower arms and i THINK (99% sure)the bags are 2600's, but the O.D. of them is touching the bump stop and tubing. The bag has 2- 1" ports if that helps.

I need a bag that has a smaller I.D. that can handle a big block. A friend is using the exact set up with no rubbing?! I also tried moving the bag around with no luck.

any suggestions from experience?? my buddy VIN63 has the same setup and is using Firestone Air Spring part number 6873 - 8-inch diameter inflated (3150 lbs. @ 100 psi). Is there any others with a smaller I.D.?

1st pic is my truck-1966, 2nd pic is a 72 with same parts,

03-28-2009, 11:40 PM	#1
66chevy PROSTREET SOLD Join Date: Jul 2008 Location: Poorest state in America(Breaux Bridge,Louisiana) Posts: 370	Which bags would solve this problem?? I have CPP lower arms and i THINK (99% sure)the bags are 2600's, but the O.D. of them is touching the bump stop and tubing. The bag has 2- 1" ports if that helps. I need a bag that has a smaller I.D. that can handle a big block. A friend is using the exact set up with no rubbing?! I also tried moving the bag around with no luck. any suggestions from experience?? my buddy VIN63 has the same setup and is using Firestone Air Spring part number 6873 - 8-inch diameter inflated (3150 lbs. @ 100 psi). Is there any others with a smaller I.D.? 1st pic is my truck-1966, 2nd pic is a 72 with same parts, Attached Images __________________ 1966 CHEVY FLEETSIDE SOLD 11-29-9 TRUCK THREAD- http://http://67-72chevytrucks.com/vboard/showthread.php?t=301368&page=2 Last edited by 66chevy PROSTREET; 03-29-2009 at 12:02 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.