easiest way to do firewall? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cstm68 · 10-15-2009, 05:07 PM

so i want to shave and repaint my firewall, is it easier to pull all the front sheet metal and engine anf tranny or to just pull the hood and fenders and pop the cab off?

my gas tank has been relocated so i dent need to wory about fules lines,

it seems to me that all i would need to do is unbolt the booster, unhook the wiring at the fire wall, disconect the heater hoses and the throtle and clutch linkage and speedo cable and un bolt the cab. am i rite or should i just pull the motor?

10-15-2009, 05:07 PM	#1
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	easiest way to do firewall? so i want to shave and repaint my firewall, is it easier to pull all the front sheet metal and engine anf tranny or to just pull the hood and fenders and pop the cab off? my gas tank has been relocated so i dent need to wory about fules lines, it seems to me that all i would need to do is unbolt the booster, unhook the wiring at the fire wall, disconect the heater hoses and the throtle and clutch linkage and speedo cable and un bolt the cab. am i rite or should i just pull the motor? __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.