Transmission Crossmember & Motor Mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Baby John · 01-08-2010, 02:32 PM

Tyler's truck was originally a 6 cylinder with a 3 on the column. It was converted to a SB 350 and 350 Auto. The crossmember job was horrible and I'm needing to fix it. Any specific suggestions, or examples of what others have done? Is there a standard swap that works?

Also, it looks like the PO welded in some motor mounts kinda poorly, and it also looks like he used 2 left hand mounts because one of them is directly reversed from the other. Same question, is there a standard swap for this?

Any help would be appreciated.

01-08-2010, 02:32 PM	#1
Baby John Registered User Join Date: Jul 2007 Location: Mendenhall MS Posts: 222	Transmission Crossmember & Motor Mounts Tyler's truck was originally a 6 cylinder with a 3 on the column. It was converted to a SB 350 and 350 Auto. The crossmember job was horrible and I'm needing to fix it. Any specific suggestions, or examples of what others have done? Is there a standard swap that works? Also, it looks like the PO welded in some motor mounts kinda poorly, and it also looks like he used 2 left hand mounts because one of them is directly reversed from the other. Same question, is there a standard swap for this? Any help would be appreciated. __________________ Baby John & Tyler Shows My son and I are resto-rodding a '72 GMC Stepside



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.