Project 50th C5 Blazer

[wholio]

Originally Posted by Twisted78SS

I do, it was the one we painted some silver over.

If you look over these pic, you can see one of the original holes lined up perfect





I believe it was the middle hole of the three on the frame. I can go a take a cloer look if you need me to.

Hope this helps a bit

Drew

thanks bro, ok well here's the thing i took the suspension off of a 1967 c10 like the front cross member and the rear coil suspension , and im in the middle of installing it on my 1969 k5 blazer 4x4 frame to convert it to 2wd, well i keep measuring and it keeps making me land on the first hole not the middle hole, im thinking i measured wrong maybe from the front cross member
but idk im someone stuck on this step, the other thing is home of my homeboys already drilled the front crossmember holes =/ he said hes is 100% sure he measured right but i dont think he did, but yeaha if i was to move the trailin arm crossmemeber to the middlehole i wouldnt come close to a 104 wheel base (i measure front the middle of the rear axle to the from crossmember like the back)