Front brake lines, need help..CPP products..
Ok, I have a 70 with 71 front disc brake setup. i purchased cpp drop kit and my truck is bagged. it has the new modular spindles. for the brake line that goes from master cylinder, over to passenger side and down towards rear is 1/4 inch line. the lower line that goes from left brakes to right brake i used the 3/16 line (smaller of the two) with the cpp kit it came with everything including the rubber 7/16 hose that goes from the caliper to the frame and attaches to the 3/16 line. my problem is the ends are set up for the 1/4line. what do i do? do i use a bigger line the 1/4 inch for left to right or is there a reducer for the 7/16 rubber to go from a 1/4 to a 3/16 on the end. thanks for the help.
|