The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-05-2010, 11:01 AM   #1
abebummy26
Registered User
 
abebummy26's Avatar
 
Join Date: Sep 2006
Location: New Haven, MO
Posts: 1,243
Hypothetical questions

Ok I'm thinking about buying a 68 chevy around the corner from me its a pretty decent truck. Not much rust for a local truck. Cab corners and rockers is all it needs. That I can See its a c30 drw 133" wheelbase. I would want to up date the brakes and stuff like that. Front Drums aren't safe in my opinion. Eventually I would want to turn it into a 4x4.

From what I have read/researched, I could Just swap over to a 4x4 front axle. With a diy4x fgb52 right? and hook up brakes to that and not run a transfer case for a while right? It would be easier to do it this way, because I wouldn't have to find a donor 1 ton to swap over the 2wd stuff. At the same time I would swap over the rear from the same set as the front. I don't need obnoxiously low gears. I realize I wouldn't have 4x4 power but I wouldn't be doing a bunch of parts hunting 2x either.

The truck itself is pretty desireable in my opinion. It has a 327,Low miles, not beat to crap, only 3 owners. I would probably end up making it a srw k30. complete with a dana 60 and hydro boost one day. Hopefully hydro boost sooner than later.
__________________
-Lincoln

1987 GMC S15 (soon to be a chevy clone)
2.5l, 4 speed, no ps, no pb, no ac

Silence is golden, but duct tape is silver.

Spoken by Cletus the hillbilly
I like stickers... a whole bunch.
abebummy26 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com