AR Big Block Chevy cam, springs & pushrods

[BossHogg69]

I have a Big Block Chevy (Mark IV) Comp XE294 cam (cam only, no lifters), Summit 1pc, .080" wall, 3/8" pushrods, and a set of Crower 68340 valvesprings for sale. The cam and pushrods have been installed, but never run, and the valvesprings have a few hours of runtime on them and are like new. The springs have been checked by a local machine shop (Rebel Rebuilders) are all are within spec. I changed over to a roller cam, so that's why I'm selling this stuff. Specs for everything are below. You can see what I paid for everything in the links provided below. I will take $220 SHIPPED!!!. First "I'll take it" gets it.

http://www.summitracing.com/parts/CCA-11-254-4/
Cam Style Hydraulic flat tappet
Basic Operating RPM Range 2,800-7,000
Duration at 050 inch Lift 250 int./256 exh.
Advertised Intake Duration 294
Advertised Exhaust Duration 306
Advertised Duration 294 int./306 exh. .
Valve Lift with Factory Rocker Arm Ratio 0.588 int./0.593 exh.
Lobe Separation (degrees) 110
Grind Number CB XE294H-10

http://www.summitracing.com/parts/SUM-1439250/
Summit Racing Part Number SUM-1439250
For Use with Guideplates Yes
Pushrod Tube Diameter 3/8 in.
Pushrod Material Chromoly
Intake Overall Length (in) 8.280 in.
Exhaust Overall Length (in) 9.250 in.
One-Piece Pushrod Yes
Wall Thickness (in) 0.080 in.
Heat-Treated Yes
Quantity Sold as a set of 16.

http://www.crower.com/valve-springs-...amper-797.html
Summit Racing Part Number CRO-68340-16
Number of Springs Per Valve Dual
Outside Diameter of Outer Spring (in) 1.500 in.
Coil Bind Height (in) 1.080 in.
Damper Spring Included Yes
Spring Rate (lbs/in) 452 lbs./in.
Inside Diameter of Outer Spring (in) 1.120 in.
Inside Diameter of Inner Spring (in) 0.755 in.
Quantity Sold as a set of 16.