info on wilwood 260-11179 please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dale99 · 01-01-2013, 04:52 PM

I am going to install the wilwood 260-11179 on my truck to replace the current prop valve. I have found alot of info that several people install this on there 67-72's. I have some questions I didnt find answers on...

1. Can someone chime if any adapter fittings are needed? Or can I just gently bend my stock lines and make it work? Parts stores here dont carry jack and any adapter fittings I need to order with it.

2. Wouldnt mind a picture or two, didnt see any.

3. I see this is 2 lines in, 3 lines out. Can I just plug one of the outs? Or do I need to run both fronts separately? If I can plug it, what fitting is needed?

01-01-2013, 04:52 PM	#1
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	info on wilwood 260-11179 please I am going to install the wilwood 260-11179 on my truck to replace the current prop valve. I have found alot of info that several people install this on there 67-72's. I have some questions I didnt find answers on... 1. Can someone chime if any adapter fittings are needed? Or can I just gently bend my stock lines and make it work? Parts stores here dont carry jack and any adapter fittings I need to order with it. 2. Wouldnt mind a picture or two, didnt see any. 3. I see this is 2 lines in, 3 lines out. Can I just plug one of the outs? Or do I need to run both fronts separately? If I can plug it, what fitting is needed? __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.