AL 1970 bare cab / driver fender/ cowl - The 1947 - Present Chevrolet & GMC Truck Message Board Network

496bb · 08-02-2013, 05:48 PM

bare cab, has VIN plate still attached. no title, just bill of sale. has been blasted at some point but not primed, so it has some surface rust. i think it will clean up fine though. cab corners are good and rockers have a few small holes but not eaten completely through. small bit of rust where floor meets kick panel. uncut dash, firewall good. has mounting nubs for divider trim and headliner. sold my project so somebody needs to come get this! $150 pickup only

GOING TO THE SCRAP YARD NEXT WEEK IF NOBODY WANTS IT

CST drivers fender, good shape. $50 pickup only

good cowl piece with mesh debris shield. $30 pickup only

08-02-2013, 05:48 PM	#1
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 283	1970 bare cab / driver fender/ cowl bare cab, has VIN plate still attached. no title, just bill of sale. has been blasted at some point but not primed, so it has some surface rust. i think it will clean up fine though. cab corners are good and rockers have a few small holes but not eaten completely through. small bit of rust where floor meets kick panel. uncut dash, firewall good. has mounting nubs for divider trim and headliner. sold my project so somebody needs to come get this! $150 pickup only GOING TO THE SCRAP YARD NEXT WEEK IF NOBODY WANTS IT CST drivers fender, good shape. $50 pickup only good cowl piece with mesh debris shield. $30 pickup only __________________ 87 3/4 Burb 454 49 Chev Fleetline Deluxe Last edited by 496bb; 08-04-2013 at 03:03 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.