Edelbrock Carb 1406 Binding - The 1947 - Present Chevrolet & GMC Truck Message Board Network

77ChevySharkBite · 10-23-2013, 09:32 PM

Hey guys,

Upon setting up the carb I noticed at full throttle the secondary valves were not opening. You have to manually actuate the secondary values by either pushing down on the choke linkage on the right side of the carb, or pulling up on the inner most bracket to free the secondary valve tab.

Has anyone dealt with or had experience with this issue?

The part circled in blue is the choke linkage. Part circled in red is the tab we were pressing to actuate the secondary valves, which is reacted on when the choke valve is completely opened.

10-23-2013, 09:32 PM	#1
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Edelbrock Carb 1406 Binding Hey guys, Upon setting up the carb I noticed at full throttle the secondary valves were not opening. You have to manually actuate the secondary values by either pushing down on the choke linkage on the right side of the carb, or pulling up on the inner most bracket to free the secondary valve tab. Has anyone dealt with or had experience with this issue? The part circled in blue is the choke linkage. Part circled in red is the tab we were pressing to actuate the secondary valves, which is reacted on when the choke valve is completely opened. __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.