Dakota Digital ECD-100 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lutronjim · 02-24-2014, 03:35 PM

Wondering if anyone has any experience using this unit to drive mechanical speedo .

Planning LC9 and L465E swap into my 70 Chev C10 pickup and want to keep original speedo. The VSS from the tranny will be needed for PCM. I have read from post that splitting VSS signal to PCM caused shifting problems.

Don't know if VSS output from PCM would work or not. GM says its 'not scaled' whatever that means.

I also looked at Cable-X unit but read of several problems.

Thanks

02-24-2014, 03:35 PM	#1
lutronjim Registered User Join Date: Dec 2013 Location: Dunwoody,Ga Posts: 443	Dakota Digital ECD-100 Wondering if anyone has any experience using this unit to drive mechanical speedo . Planning LC9 and L465E swap into my 70 Chev C10 pickup and want to keep original speedo. The VSS from the tranny will be needed for PCM. I have read from post that splitting VSS signal to PCM caused shifting problems. Don't know if VSS output from PCM would work or not. GM says its 'not scaled' whatever that means. I also looked at Cable-X unit but read of several problems. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.