![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#11 |
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
Re: [PROJECT] "Hot Rod" 1931 model a Bonneville/ Rolling bones style
Well I finally got around to getting the clutch linkage hooked up, had to notch out the x-member in order to get the pedal to travel far enough. also got the steering box mount modified to work for side steering and made a riveted cover for the frame where the shaft comes out. Yesterday I fixed the bad patch job where the old filler used to be in the cowl that the previous owner did. also welded the cowl side seems.
Initial mock up ![]() ![]() modified mount and final placement (still need to trim down) ![]() ![]() this is what I came up with to strengthen the area I remove for the clutch arm clearance (will weld in once the body is removed) ![]() ![]() Cowl top before ![]() ![]() cowl top after lots of hammer and dolly work and little bit of English wheeling ![]() ![]() ![]() And cowl welded in ![]() ![]() Justin
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean |
![]() |
![]() |
Bookmarks |
|
|