Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
07-23-2015, 12:20 AM | #11 | ||
Simple? What's simple?
Join Date: Apr 2007
Location: Southeast CT
Posts: 1,472
|
Re: New project! The "Red Herring"
Quote:
Quote:
Made the mounting tabs tonight. Okay, well seven of eight Here you can see the passenger;s seat is set in place and bolted down (I have not drilled a bolt hole in the elevated mount at the inside front of the seat yet, and I just cooked my 7/16" bit sooo that may not happen for a bit), and the three level tabs for the driver's seat. Haven't fitted the elevated mount for this side yet. A couple shots with both seats bolted down. The sharp eyed may note the driver's seat is slightly further back than the passenger's - the mounts are not symmetric, and the driver's seat goes further back with the front bolts aligned. Who knew?? I noticed this once I actually bolted them down: Looks like I may be shimming the inside a little bit to get them level. Or maybe just designing different mount tabs. Or maybe just ignoring it Apparently the floor in the S10 was not flat like I thought. I'm going to have to sit in the truck a bit and decide if it feels odd to me or not. I also decided I'd make a center support for the bracket as well, between the seats. That will also likely lend itself to mounting the seatbelts.
__________________
CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder) |
||
Bookmarks |
|
|