Here it goes again, plz chime in

[67/Heaven]

Originally Posted by firedemon

post pics of your solution to the alignment too I have a pulley system that said it wont work with power steering pump . I saw them on ebay this should be great for us 67 guys

I have a dual groove main with only the front being used to drive the water pump and alternator. My issue is with the alternator pulley as it is dual but not the oem part.(you may or may not know the oem pulley has about about 1/2 of steel between the last groove and the alt fan). Luckly I just ordered one on ebay, used hard to find but today was my lucky day.

Additionally my water pump pulley is single but with an O.D. of about 7" which puts it real close to the main pulley so getting the v belt to the rear groove would require removing or loosening the fan. For that I ordered a dual groove fan pulley with an outside diameter of 6.3" this should increase flow a bit while allowing for installation and removal of the rear belt.

The plan is to drive the alternator solely with the rear grove on the main
The front groove will drive the waterpump and ps. pump.
I have a 292 so the only bracket I could find are found on ebay for about 130. Pictures will be posted in a few as a work in progress, still waiting for pulleys but the steering box you will be able to see