Skid Plates for GMC? 4x4 or 2wd... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Brad54 · 10-02-2017, 02:56 PM

I think I saw somewhere on here that GMC's had a skid plate under the radiator. Is that right?
And if they do, was it '60-'62 torsion-bar tucks, '63-66 trucks, 1/2-ton or 3/4-ton and heavier?
Did they have any for 4x4 trucks?
I'm going to start a '62 K10 next spring, and would like to put any factory heavy-duty parts on it.

There's a GMC 1-ton (knee-knocker cab, but don't know the year) in the bone yard with dual wheels, and another '61 C-40 Chevy flat bed in the same yard. Would either of them have the skid plate I saw here?

-Brad

10-02-2017, 02:56 PM	#1
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,456	Skid Plates for GMC? 4x4 or 2wd... I think I saw somewhere on here that GMC's had a skid plate under the radiator. Is that right? And if they do, was it '60-'62 torsion-bar tucks, '63-66 trucks, 1/2-ton or 3/4-ton and heavier? Did they have any for 4x4 trucks? I'm going to start a '62 K10 next spring, and would like to put any factory heavy-duty parts on it. There's a GMC 1-ton (knee-knocker cab, but don't know the year) in the bone yard with dual wheels, and another '61 C-40 Chevy flat bed in the same yard. Would either of them have the skid plate I saw here? -Brad __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.