WA Tilt Column, $329 shipped

[randy500]

This is a van tilt that I converted to fit our trucks.

Completely disassembled, bead blasted and painted. Bearings cleaned and lubed.

Back up lights switch moved to proper lower column location and proper truck grommets and lower retainer installed.

Upper grommet and tilt lever are new reproductions.

Turn signal switch was disassembled, cleaned and lubed, no cracks in turn signal cam. Purple wire has a butt connector.
Shifter pin hole is a little loose, shifter arm spring tension seems to hold pin ok, I would epoxy the pin after install and that would fix it.